✓ Verified memberPOWER SYSTEM EDISON DV 2023
Power System Edison 2023 used Skruekompressor Atlas Copco Granzow 20 25 30 kw screw compressor see more used machines on dentool.dk (Kaeser)
441 machines from 41 member dealers. Filter these results →
✓ Verified memberPower System Edison 2023 used Skruekompressor Atlas Copco Granzow 20 25 30 kw screw compressor see more used machines on dentool.dk (Kaeser)
✓ Verified memberRHTC Profi Press Verkstadspress 100 ton, motor and hand pump, removable cylinder, 380 mm stroke length, 1.100mm between gables, pressure speed 2,47 mm/sec, double-acting cylinder, weight 970 kg. Made in Holland
✓ Verified member- Tooling as per photo Used Machine tools for sale NATIONAL M3
✓ Verified member2 x Spiertz 400-Ton Mechanical Presses with moving bolster
Tonnage 12ton Stroke length 8″ Stroke adj 1 1/2″ Throat 8 1/2″ Ram dia 1″
✓ Verified memberBambi VTS 250 Oil-Free Air Compressor. Oil-free, silent piston air compressor Motor: 2.5 HP / 1.84 kW Supply: 240 V / 50 Hz Current: 13.5 A (current specification) Receiver capacity: 59 litres Maximum pressure: 8 bar / approx. 116 psi Weight: 122 kg
✓ Verified member
✓ Verified memberDirect drive coaxial screw compressor requiring no maintenance and maximum energy efficiency Standard, with electronic control (EasyTRONIC) Thermostatically controlled radial fan ensuring maximum cooling and therefore optimum working temperature for
✓ Verified memberCode: ST2543 Pressure Force (KN) 981 Maximum Pressure (Bar) 258 Piston Stroke (mm) 380 Oil Delivery (Ltr/Min) 5.64/17.2 Oil Capacity(Dm3) 46 Working Speeds (mm/sec) 2.47 Approaching Speed (mm/sec) 7.54 Return Speed (mm/sec) 9.06 Motor Power (kw) 2.2
✓ Verified member- Hydraulic Clutch - CE-Safety 2e hand opperator system - Adjustable stroke / ram - Full set books / drawing / CE-Mark -
✓ Verified memberProfi Press 60 T
✓ Verified member
✓ Verified memberHare 16 Ton Hydraulic C-Frame Press The Hare 16 Ton Hydraulic C-Frame Press is a robust workshop press designed for a wide range of pressing, forming, straightening and assembly applications. With a 16-ton hydraulic capacity, this machine provides a
✓ Verified memberNORTON 5T Flypress on bench
✓ Verified memberCyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary
✓ Verified memberCINCINNATI MILACRON GH40 OPEN FRONTED ADJUSTABLE STROKE INCLINABLE PRESS Model: GH40 Serial No: 17849 Capacities: Bed Area: 27.5” x 19” Ram Adjustment: 2.5” Stroke: 1” – 4” Speed: 135 Strokes Per Minute Die Height: 10.5” At Mid Stroke Adjustment Up M
✓ Verified member
Auction lotCTF Robotic Compressor Mounting Station (2002), Cycle Time 43 Seconds, Kuka KR30-3 Robot 2017, Comau Smart-5 NJ Robot (2013)
✓ Verified membercolumn spindle press
✓ Verified member
✓ Verified memberMachine Name – Benelli 1000 Tonne automatic transfer press Machine Model – Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description – 1000 ton Press SPM up to 26 Number of operational positions: 5 Press bed 5000
✓ Verified memberMore in Stock POA Atlas Copco G7FF 2023 View Details Register Interest Name* Phone No* Email* Message* Register
✓ Verified memberCHAPTER Size Plans 2200x1800 mm86,61x70,87 in Max distance between floors 2000 mm78,74 in Max weight on lower floor 10000 Kg Max weight on top floor 10000 Kg Max closing force 1500 kN Max opening force 600 Upper floor overhaul YES
✓ Verified member
✓ Verified memberSpecifications: Stroke (mm): 200
✓ Verified memberBrand Huvema Machine no PE440X Type 30 T Year of make 2025 Capacity 30 T Table length 740 mm Table width 520 mm Distance between the columns 740 mm Daylight 900 mm Stroke 400 mm Engine power 3 kW Throat depth 300 mm Machine dimensions (L×W×H) 1.400 x
✓ Verified member
✓ Verified memberBruderer Press BSTA30. 30 Ton Capacity, Digital Display. Variable Range 100-600 RPM Stroke Adjustment 8-40mm Ram adjustment 40mm Drive Motor 5.5KWMax material Width 120mmMax Material Thickness 3mm
✓ Verified memberPressure force 2943 kN Working width 1750 mm Maximum pressure 260 Bar Piston stroke 480 mm Inside diameter of cylinder 380 mm Diameter of piston rod 160 mm Diameter of piston head 215 mm Working speed 1,80 mm/sec. Motor power 5,5 kw Weight 3150 kg
✓ Verified member
✓ Verified memberMax. press pressure 40 ton table size 600 x 400 mm adjustable stroke length 10-80 mm number of strokes per / min 100 throat depth 225 mm installation height 360 mm adjustable cross-head 65 mm tiltable
✓ Verified memberHidragroup 50 t die spotting press Hydraulic press for the adjustment and touching-up of moulds, known in the workshop as a die spotting or inking press. It allows the two halves of a mould or die to be closed under controlled pressure to check the c
✓ Verified memberCompac HP Range of Presses are hand operated frame presses used widely in various workshops. Fast and safe adjustment of the press table height, using a braked winch. Capacity 20 – 100 Ton. Air connection fitted with water separator. Moveable cylinde
With variable speed control [SFC] Maximum operating pressure: 8.5 bar Free Air Delivery [FAD]: 2.84...
✓ Verified memberKaeser SX 6 screw compressor along with cooling dryer TA 8 offers a stable and professional solution for producing compressed air in smaller and medium-sized workshops. Kaeser is one of the market’s most established manufacturers of compressed air eq
✓ Verified memberMax. press power 63 Ton Number strokes per min 63 stroke length Adjustable 10 - 100 mm table size 750 x 500 mm Distance from body to tool centre 395 mm print
✓ Verified memberUsed eccentric press PMB EPF 64 - 32 - 90 see more used machines on dentool.dk
✓ Verified memberUsed Machine tools for sale OSTERWALDER
✓ Verified member
✓ Verified member
✓ Verified member2 speed – stationary – double piston – 810 L/min
✓ Verified memberCode: ST2542 Pressure Force (KN) 588 Maximum Pressure (Bar) 259 Piston Stroke (mm) 380 Oil Delivery (Ltr/Min) 2.82 / 11.84 Oil Capacity(Dm3) 41 Working Speeds (mm/sec) 2.07 Approaching Speed (mm/sec) 8.69 Return Speed (mm/sec) 10.79 Motor Power (kw)
✓ Verified member- Decoiler - Max. width 350 mm - Clamping area coil internal mm - Coil diameter 1500 mm - Work load 1000 Kg - Straigtner - Width 250 mm - Roll diameter 30 mm - Number off rolls 21 units - Working speed 40 M/Min - Max. thickness 6 mm at 240 N/mm2 - Ma
✓ Verified memberProfi Press 100 T
✓ Verified member
✓ Verified memberHare 16 Ton Hydraulic C-Frame Press The Hare 16 Ton Hydraulic C-Frame Press is a robust and versatile workshop press designed for a range of general engineering, maintenance and fabrication applications. With a 16-ton hydraulic pressing capacity, the
✓ Verified memberSweeney & Blocksidge Fly Press
✓ Verified memberSWEENEY & BLOCKSEDGE FLY PRESS, Throat Depth 140mm, Maximum Height 305mm, Hole Diameter in Base 125mm, Approximate Dimensions 1100 x 500 x 1100mm
✓ Verified memberComplete with: - horizontal piston: 600 x 580 mm.; stroke 650 mm.
Auction lotBassra Super Spacer Drying Enclosure. Serial No: BMT-SSDE-16671 (2017)
✓ Verified memberSlot table at T
Manual column spindle press in sturdy design
✓ Verified memberCHAPTER Max distance between floors 1500 mm59,06 in Size Plans 1800X1400 mm70,87X55,12 in Upper floor overhaul 180 °
✓ Verified member
✓ Verified member
✓ Verified memberSpecifications: Stroke (mm): 200
✓ Verified memberBrand Airpress Machine no C064 Type APS 5.5 Basic Combi Year of make 2005 Screw compressor Capacity 470 L/min Workload 10 Bar Tank content 200 L Engine power 4 kW Tension 380 V Soundproofed Working hours 1.252 Machine size (lxwxh) 1.600 x 600 x 1.300
Fini Compressor ROTAR 6013 screw, 13 Bar, 60HP, 45 KW, 188 PSI, with COOLTECH receiving Tank 1500 litres capacity,
✓ Verified memberPressure force 1962 kN Working width 1300 mm Maximum pressure 243 Bar Piston stroke 400 mm Inside diameter of cylinder 320 mm Diameter of piston rod 140 mm Diameter of piston head 175 mm Working speed 1,84 mm/sec. Motor power 3,0 kw Weight 1690 kg
✓ Verified member
✓ Verified memberMax. press pressure 30 ton stroke length 380 mm Review between stands 750 mm pressing speed 3,57 mm / sec. rapid approach speed 9,8 mm / sec. return speed 18,11 mm / sec. motor power 1,5 Kw motorised Equipped with: 2-speed pump system adjustable pres
✓ Verified memberUsed TK BP-55F twin-screw air compressor to supply the compressed-air network of a workshop or industrial unit. According to the photos, it is housed in a soundproof cabinet with access doors, a control panel with display and emergency stop, and side
✓ Verified memberSweeney & Blocksidge 3T Flypress. Machine Equipped With: Fly arm Table mounted
75 KW Volume rate of flow m3/min 13,98 Stage pressures bar 13 Suction pressure bar 1 Speeds number...
✓ Verified memberBoge C10 LDR-350 is a compact and energy-efficient screw compressor in complete execution with integrated cooling dryer and air container. Boge is a well-known German premium manufacturer in compressed air solutions focusing on high reliability and l
✓ Verified memberMax. press power 32 Ton Number strokes per min 130 stroke length Adjustable 8 - 86 mm table size 550 x 420 mm Distance from body to tool centre 220 mm print
✓ Verified memberUsed PMB EPFT 1000 eccentric press used 90 100 125 T eccentric press see more Used presses and other machines and used equipment on dentool.dk
✓ Verified memberUsed Machine tools for sale JAGGI CJ-48-10
✓ Verified member5 x Wilkins & Mitchell (1977-78) 800-Ton 4-Point Single Action Mechanical Presses, complete with two moving bolsters each press through side columns, destacker system with two loading tables, robot at the head of the line, and iron hands in-between e
✓ Verified member
✓ Verified member
✓ Verified member- Rebuild in 2010 with SIEMENS TOUCH - Rebuild cost EUR 200.000 - Distance measuring device with double taster - Big package with pressing tools in several diameters
✓ Verified member
✓ Verified memberHare BS 5 Ton Hydraulic C-Frame Press The Hare BS 5 Ton Hydraulic C-Frame Press is a compact and versatile workshop press designed for a range of light-duty pressing, forming, bending and assembly applications. With a 5-ton hydraulic capacity, it is
✓ Verified memberENERPAC 23 TON HYDRAULIC GARAGE PRESS Type: RC2510 Ref No: ESP2042 Capacities: Distance Between Frames: 505mm Minimum Distance Under Ram: 125mm Maximum Distance Under Ram: 980mm Ram Stroke: 125mm Ram Diameter: 60mm Approximate Dimensions: 1100 x 960
✓ Verified memberComplete with: - removable bottom mobile table, stroke 2.320 mm. - top table tipping 115°
Auction lotBassra Super Spacer Drying Enclosure. Serial No: BMT-SSDE-16671 (2017)
✓ Verified memberPneumatic multiple toggle press
✓ Verified memberCHAPTER Max distance between floors 2200 mm86,61 in
✓ Verified member
✓ Verified memberSpecifications: Capacity (ton): 30, Stroke (mm): 160
✓ Verified memberBrand Müller Machine no PE436 Type 15T Capacity 15 T Table length 530 mm Table width 340 mm Stroke 60 mm Daylight 230 mm Throat depth 170 mm Stroke adjustment 4 - 60 mm Machine dimensions (L×W×H) 1.200 x 80 x 1.750 mm
, automactic hydro-pneumatic press for mounting of materialographic specimens for microscopic examination, with operators manual and attachment.
✓ Verified memberPressure force 1570 kN Working width 1500 mm Maximum pressure 255 Bar Piston stroke 400 mm Inside diameter of cylinder 260 mm Diameter of piston rod 125 mm Diameter of piston head 160 mm Working speed 2,4 mm/sec. Motor power 3,0 kw Weight 1430 kg
✓ Verified member
✓ Verified memberMax. press pressure 60 ton stroke length 380 mm 750 mm pressing speed 2,07 mm / sec rapid approach speed 8,69 mm / sec. return speed 10,79 mm / sec. motor power 1,5 Kw motorised Equipped with: 2-speed pump system adjustable presser table Sidehost adj
✓ Verified memberHydraulic press for spotting and trying out moulds The Tamegar PM 56 T is a hydraulic spotting and stamping press made by Tamegar in Elche (Alicante). It is used in mould and die shops to close, adjust and check the contact between the two halves of
✓ Verified memberCompac FP Range of Presses (Foot Operated) is a popular range of workshop press. Foot operated air approach feature. Foot operated for hands-free operation under load and return. Moveable cylinder with very long stroke up to 300mm. Hard chrome piston
KW 45 Working pressure bar 7 Pressure max bar 10 EQUIPPED WITH: -Tank lt.1000 -Dryer USED...
✓ Verified memberModel 9PP is designed to provide robust and flexible protection when working with press machines. The structure consists of a heavy metal frame with displays of impact resistant material that effectively protect the operator against splitters and cla
✓ Verified memberC-Presse - Hydr. Press LFSS HCP 40 60 100 New - see more press at dentool.dk
✓ Verified memberUsed Machine tools for sale JAGGI CJ-48-10
✓ Verified memberComplete with fixed bolster, hydraulic overload, die cushion, large side windows, air operated clutch and brake, fully t-slotted slide and bolster, new operator guards.
✓ Verified member
✓ Verified member
✓ Verified member
✓ Verified member80T Garage Press The 80T Garage Press from Blue Diamond Machine Tools is a heavy-duty hydraulic press designed for a wide range of pressing, bending, and straightening applications. With a substantial 80-ton capacity, it is ideal for workshops and in
✓ Verified memberMake: Compair Receiver Mounted Screw Type Compressor with Integral Chiller Type: L18-7.5 FS Serial No: 349034/0165 MFD: 2008 Capacities: FAD: 3.07 CM/Min Normal Pressure: 7.5 Bar Main Motor: 18.5kw Receiver Volume: 500 LTR Noise Level: 71dB Electrics
✓ Verified memberComplete with: - removable bottom mobile table, stroke 2.500 mm. - top table tipping 110°
Auction lotCompair/Gardner Denver L22 22kW Air Compressor. Serial No: CD10052220002 (2020) ID No: 100016081 Recorded Hours: 10,541 with Receiver and Compair Dryer. Serial No: 398847650001
✓ Verified memberTwo slots at T.
✓ Verified memberHigh speed aut. punching press, decoiler, soundproof cabin
✓ Verified memberCHAPTER Size Plans 1600x2000 mm62,99x78,74 in Max distance between floors 1500 mm59,06 in Distance min between floors 400 mm15,75 in Upper floor overhaul 110 ° Max weight on the lower floor 40000 Kg Max weight on top floor 15000 Kg Max closing force
✓ Verified member
✓ Verified memberBrand Profi Press Machine no PE435 Type CM 100T Year of make 2020 Hydraulic Capacity 100 T Table length 800 mm Table width 500 mm Stroke 500 mm Daylight 600 mm Machine dimensions (L×W×H) 1.600 x 1.200 x 2.750 mm Machine weight 3500 kg
✓ Verified memberPressure force 1570 kN Working width 1100 mm Maximum pressure 255 Bar Piston stroke 400 mm Inside diameter of cylinder 280 mm Diameter of piston rod 125 mm Diameter of piston head 160 mm Working speed 2,4 mm/sec. Motor power 3,0 kw Weight 1195 kg
✓ Verified member
✓ Verified memberMax. press pressure 100 ton stroke length 380 mm Review between pedestals 1100 mm pressing speed 2,47 mm / sec. rapid approach speed 7,54 mm / sec. return speed 9,06 mm / sec. motor power 2,2 Kw motorised Equipped with: 2-speed pump system adjustable
✓ Verified memberBottarini compressed air dryer, model ED 77, from 1998. It is installed at the compressor outlet to remove moisture from the air before it reaches the workshop network, protecting pneumatic tools, cylinders and paint or blow-off equipment. Features o
✓ Verified memberFIXED SPEED BELT DRIVE Motor Power HP/KW 15/11 Pressure Bar 10 FAD: -l/min 1416 -m3/h 85 Noise...
✓ Verified memberModel 9FVH is designed for hydraulic presses where a robust and comprehensive protection is required. The design consists of a stable frame in pipe profile with impact-resistant polycarbonate displays that provide good insight into the work area whil
✓ Verified memberUsed Machine tools for sale JAGGI CJ-48-10
✓ Verified memberUSI Clearing 1000-Ton 4-Point Single Action Mechanical Transfer Press, complete with Siemens S7 controls and Dreyer transfer feed system.
✓ Verified member
✓ Verified member
✓ Verified member
✓ Verified memberNorton Arbor Press The Norton Arbor Press is a robust manual press designed to deliver precise force for a variety of industrial tasks. Engineered with high-quality materials, this press ensures reliability and longevity, making it an essential tool
✓ Verified memberMake: Boge Receiver Mounted Screw Type Compressor Model: SD 20-2/750 Serial No: 53386 MFD: 2003 Capacities: Maximum Working Pressure: 8 Bar, Rate of Flow: 2.57m/min, Receiver Capacity: 750 Litres Motor: 15kw Electrics: 415v, 3ph, 50 Cycles
Complete with: - safety protection
Auction lotCompair Dryer. Serial No: 398847650001
✓ Verified member
✓ Verified memberHigh speed aut. punching press, decoiler, soundproof cabin
✓ Verified memberCHAPTER Size Plans 2500x2000 mm98,43x78,74 in Distance between columns 2300 / 2870 mm90,55 / 112,99 in Distance min between floors 400 mm15,75 in Max distance between floors 2500 mm98,43 in Max weight on the lower floor 22000 Kg Max weight on top flo
✓ Verified member
✓ Verified memberBrand Berrenberg Machine no PE433 Type EPrG 30T C-Frame Capacity 30 T Table length 650 mm Table width 440 mm Stroke 70 mm Daylight 250 mm Throat depth 350 mm Stroke adjustment 10 - 70 mm Machine dimensions (L×W×H) 1.500 x 800 x 2.000 mm Machine weigh
✓ Verified memberPressure force 981 kN Working width 1500 mm Maximum pressure 258 Bar Piston stroke 380 mm Inside diameter of cylinder 220 mm Diameter of piston rod 90 mm Diameter of piston head 120 mm Working speed 2,47 mm/sec. Motor power 2,2 kw Weight 1445 kg
✓ Verified member
✓ Verified memberMax. press pressure 100 ton stroke length 380 mm Review between pedestals 1500 mm pressing speed 2,47 mm / sec. rapid approach speed 7,54 mm / sec. return speed 9,06 mm / sec. motor power 2,2 Kw motorised Equipped with: 2-speed pump system adjustable
✓ Verified memberMechanical eccentric press Smeral LKR 200/80 200-tonne mechanical eccentric press built by Šmeral Brno (Czech Republic) in 1962. It is designed for cutting, punching and stamping sheet metal in production runs, with an 800 x 800 mm table and a short
✓ Verified memberFIXED SPEED BELT DRIVE Motor power HP/kW 10/7,5 Pressure Bar 10 FAD: -l/min 996 -m3/h 60 Noise...
✓ Verified memberUsed Machine tools for sale JAGGI CJ-48-10
✓ Verified memberComplete with Feed, stacker and side loader.... Feed: Feed width 300 mm – 1600 mm Feed thickness 0.5 mm – 3 mm Stacker: Plate length 300 mm -1600 mm Plate width 200 mm – 1600 mm Side loader: Plate length 200 mm – 2500 mm Plate width 300 mm – 1600 mm
✓ Verified member
✓ Verified member
✓ Verified member
✓ Verified memberMake: BOGE Screw Type Compressor Type: SD10 Serial No: 5019749 MFD: 2007 Capacities Maximum Pressure: 10 Bar CFM: 39 Flow Rate: 1.06 3m/min Motor: 7.5 Kw Electrics: 415v, 3ph, 50 Cycles Tank Capacity: 350 ltr Approximate Dimensions: 1650 x 790 x 1550
Auction lotReceiver Tank
✓ Verified memberFour-column punching machine with sound enclosure
✓ Verified memberCHAPTER Size Plans 1100x750 mm43,31x29,53 in Distance between columns 1200 mm47,24 in Distance min between floors 85 mm3,35 in Max distance between floors 985 mm38,78 in Max weight on the lower floor 5000 Kg Max weight on top floor 2000 Kg Max closin
✓ Verified member
✓ Verified memberAir tank, compressed air receiver Brand Airpress Machine no M1045 Type 500L Workload 16 Bar Tank content 500 L Machine size (lxwxh) 750 x 750 x 2.500 mm
✓ Verified memberPressure force 981 kN Working width 1100 mm Maximum pressure 258 Bar Piston stroke 380 mm Inside diameter of cylinder 220 mm Diameter of piston rod 90 mm Diameter of piston head 120 mm Working speed 2,47 mm/sec. Motor power 2,2 kw Weight 970 kg
✓ Verified member
✓ Verified memberMax. press pressure 300 ton stroke length 480 mm Review between pedestals 1750 mm pressing speed 1,80 mm / sec. rapid approach speed 4,90 mm / sec. return speed 6,20 mm / sec. motor power 5,5 Kw motorised Equipped with: 2-speed pump system adjustable
✓ Verified memberWhat it is Piston air compressor from the Italian brand Newco (Intertec / Airteco label) mounted on a horizontal air receiver. The plate on this unit gives model NG6-270F-5.5TK and a manufacturing date of 05/12/2016. Key strengths This type of compre
✓ Verified memberWith variable speed control [SFC] Power: 55 kW Sound pressure level: 71 dB[A] Width: 104.1...
✓ Verified memberUsed Machine tools for sale SCHMIDT 5
✓ Verified memberComplete with Muller Weingarten UWR120 decoiler and leveller Speed 40 spm Feed length 0 - 500 mm Strip width 150 - 1200 mm Strip thickness 1 - 3.5 mm Maximum coil weight 15 tons with loading carriage Coil sizes OD 900 - 1800 mm / ID 508 - 610 mm Feat
✓ Verified member
✓ Verified memberFor Sale - NUGIER Presses, H-Frame - Nugier 80T “H” Frame Press
✓ Verified memberMake: Compair Broomwade Refrigerant Dryer Type CD50, Serial No CO20/0104, MFD 1984, Maximum Pressure 14 Bar, Motor 0.73kw, Electrics 240v, 1ph, 50 Cycles
Auction lotGardner Denver / Hydrovane HR 04E 07-4035S200 4kW Air Compressor. Serial No: HR04-000674-2509 (advised 2025) Recorded Hours: 669 with Receiver and Dryer
✓ Verified memberUniversal eccentric press, double column, mechanical
✓ Verified memberCHAPTER Size Plans 1500x1000 mm59,06x39,37 in Max closing force 100 kN Max distance between floors 1500 mm59,06 in Distance between columns 1600 mm62,99 in Upper floor overhaul Yes EXTRA Total installed power 25 Kw
✓ Verified member
✓ Verified memberBrand Airpress Machine no C063 Type APS 10D / CDRY10D/D Control Electronic ES 3000 Year of make 2008 Screw compressor Capacity 1.000 L/min Workload 10 Bar Tank content 500 L Engine power 7.5 kW Tension 380 V Soundproofed Includes air dryer Machine si
✓ Verified memberPressure force 588 kN Working width 750 mm Maximum pressure 259 Bar Piston stroke 380 mm Inside diameter of cylinder 170 mm Diameter of piston rod 75 mm Diameter of piston head 100 mm Working speed 2,07 mm/sec. Motor power 1,5 kw Weight 540 kg
✓ Verified memberMax. press pressure 160 tonnes table size 1000 x 720 mm number of strokes per / min 45 Cross-head adjustment 20-120 mm stroke length 355 mm
✓ Verified memberWhat it is Rotary screw air compressor from the Italian brand Balma, Oasis series, mounted on an air receiver. It supplies compressed air for the workshop and pneumatic tool lines. The plate on this unit identifies it as OA 15 and the label as Screw
✓ Verified memberPressure bar 7,4 Motor power kW 45 Motor speed rpm 2965 EQUIPPED WITH: -Dryer and tank USED MACHINE
✓ Verified memberUsed Machine tools for sale SCHMIDT 13F
✓ Verified member**The machine has been used as a chassis press and a transfer press** Complete with moving bolster, light guards, mechanical guards, 4 x gantry mounted robotic transfer with ABB 6-axis robots and controllers, robotic track slides, 3 m conveyor belts,
✓ Verified member
✓ Verified member
✓ Verified memberMake: Worthington Creyssenac Refrigerant Dryer Model: DW31 Serial No: CAI129394, MFD: 2004 Capacities: Maximum Working Pressure: 16 Bar Refrigerant Type: R134A Electrics: 240v, 1ph, 50 Cycles Motor: 1.08kw Approximate Dimensions: 950 x 465 x 740mm Ap
Auction lotCompair / Gardner Denver L22 RS 22kW Air Compressor. Serial No: CD10029751001 (2017) Recorded Hours: 53,195
High speed aut. punching press, soundproof cabin
CHAPTER Size Plans 130X900 mm5,12X35,43 in Max closing force 70 Upper floor overhaul 180 ° Max weight on lower floor 6500 Kg Max weight on top floor 2500 Kg Max distance between floors 1250 mm49,21 in Distance min between floors 150 mm5,91 in EXTRA H
✓ Verified member
✓ Verified memberBrand Haco Machine no PE413 Type HPCR-150 Control Haco bc41 control Year of make 2002 Capacity 150 T Table length 2200 mm Table width 1500 mm Stroke 400 mm Daylight 600 mm Hydraulically driven Machine size (lxwxh) 5.300 x 2.100 x 4.300 / 3.300 mm Mac
✓ Verified memberPressure force 294 kN Working width 750 mm Maximum pressure 221 Bar Piston stroke 380 mm Inside diameter of cylinder 130 mm Diameter of piston rod 55 mm Diameter of piston head 80 mm Working speed 3,57 mm/sec. Motor power 1,5 kw Weight 385 kg
✓ Verified member
✓ Verified memberMax. press pressure 100 tonnes Review between pedestals 1050 mm stroke length 350 mm Speed idling 25 mm / sec Speed pressure 2 mm / sec Hydraulic motorised Available in many sizes, call / write for offers
✓ Verified memberHydrovane HV15 compressor with air receiver and dryer Hydrovane HV15 industrial air compressor with an air receiver and a compressed air dryer with filters. For air supply in workshops, production lines and maintenance. Condition to be checked In the
MOD. XAS 125 Flow rate 7.5 m3/min. Engine power 55.5 KW Max pressure 8.5 bar Weight 1530 kg USED...
✓ Verified memberUsed Machine tools for sale SCHMIDT 11F-325-95
✓ Verified memberComplete with Siemens S7 300 controls, 2 feeding lines (one from the side for blank cutting in transfer mode and one in line for progressive die operation), tool clamping device, decoiler, leveller, strip feeder, roll feeder, waste cutter, gripper tr
✓ Verified member
✓ Verified member
✓ Verified memberMake: Boge Receiver Mounted Screw Type Compressor Model: S6/150 Serial No: 47450 MFD: 2002 Capacities: Maximum Working Pressure: 8 Bar Rate of Flow: 0.55 m/min Reciever Capacity: 150 Ltr Electrics: 415v, 3ph, 50 Cycles Motor 4kw Approximate Dimension
Auction lotHydrovane 707 PURS10 Receiver Mounted Air Compressor. Serial No: 707-U08741 with Standalone Receiver and Compair Dryer
Double column blanking press
✓ Verified memberPRODUCT FEATURES power main motor 32 Kw Approximate weight 46000 Kg Return 0-67 mm/sec. Work 0-8 mm/sec. Approach 0-80 mm/sec. Distance between table and table 500 mm19,69 in Incave depth 400 mm15,75 in stroke max. peston 250 mm9,84 in Transition bet
✓ Verified member
✓ Verified memberBrand NN Machine no PE412X Type 60Ton Capacity 60 T Table length 2.000 mm Table width 950 mm Table height 960 mm Distance between the columns 1.035 mm Stroke 160 mm Electrically hydraulically driven Machine dimensions (L×W×H) 2.000 x 1.500 x 2.200 mm
✓ Verified memberWork pressure 10 Bar Power 15 kW Output 2,2 m3/min. Noise level at 1 meters 61 DB(A) Working voltage 3x 400 V Frequency 50 Hz Dimensions (LxWxH) 1300 x780 x 1555 mm Weight 470 kg Including compressed air dryer Berko BFN 186 (2007) Dimensions (LxWxH)
✓ Verified member
✓ Verified memberWhat it is Piston air compressor mounted on a horizontal tank, designated HP 7.5, which supplies compressed air to workshops and pneumatic installations. It is available used from Ferrotall. Key strengths Piston compressors with a horizontal tank are
Load l/min 2600 Pressure bar 10 Power kw 22 Revolution rpm 1500 EQUIPED WITH: -Dryer ED 480...
✓ Verified memberUsed Machine tools for sale ESSA RE 8
✓ Verified memberTHE PRESS HAS HYDRAULIC OVERLOADS BUT NO CUSHION THE SLIDES ARE NOT INDEPENDENT (SAME FIXED STROKE, SAME SPEED, BUT SLIDE ADJUSTMENTS ARE INDEPENDENT) THE PRESS HAS BEEN FULLY RECONDITIONED MECHANICALLY, ELECTRICALLY AND HYDRAULICALLY
✓ Verified member
✓ Verified member
Auction lotHaeger 618-H Insertion Press (1998)
Air Compressor, Pistonaggregate, 4 kw
EXTRA Notes Hydraulic
✓ Verified member
✓ Verified memberMake Müller Machine No PE385 Type 80 EK Capacity 80 T Tafellengte 850 mm Tafelbreedte 550 mm Strike 100 mm Uitlading 250 mm Strike adjustment 60 mm Table height adjustable Machine dimensions (L×B×H) 2.100 x 1.300 x 2.500 mm
✓ Verified member
✓ Verified memberUsed ABC (II) piston compressor ABC piston compressor, unit (II) from our workshop clearance lot. The photo shows a unit with two V-arranged cylinders, electric motor, belt guard and starter, mounted on a horizontal air receiver. Configuration of thi
✓ Verified memberPower 22 kW Working pressure 7 bar Max pressure 13 bar Volts/Hz/Ph 400/50/3 Machine weight 441...
✓ Verified memberUsed Machine tools for sale ESSA RE 8
✓ Verified memberComplete with pneumatic clutch, manual tool loading and feed line.
✓ Verified memberOrigin of manufacture Switzerland 380/50/3 voltage Net weight with motor, without base 245-295 kg Normal net foot weight (sicle) 95 kg Customs position 8462.9930 TECHNICAL CHARACTERISTICS TYPE D-8 / D8-200: Maximum power 8 tones Max. section to shear
✓ Verified member
Auction lotCompair/Gardner Denver L30-7.5A 30kW Air Compressor. Serial no: CD10063055001 (2022) ID no: A34905501 Recorded Hours: 10,445 (at 03/26), 2000litre Receiver Tank, Beko DPRA 0490 R3.0 AC Dryer. Serial no: 240013390 (2024) with Two Filters, Compair CSPE
✓ Verified member
✓ Verified memberMake Mios Machine No. PE393 Type T20 Capacity 20 T Tafellengte 400 mm Tafelbreedte 300 mm Strike 65 mm Uitlading 200 mm Number of strokes 120 p/min Machine dimensions (L×B×H) 1.000 x 850 x 1.800 mm Machinegewicht 700 kg
✓ Verified member
✓ Verified memberUsed ABC (I) piston compressor ABC piston compressor, unit (I) from our workshop clearance lot. The photo shows a unit with two V-arranged cylinders, electric motor, belt guard and starter, mounted on a horizontal air receiver. Configuration of this
Pressure bar 7.0-7.5 Power kW 22 Speed rpm 1460 Weight Kg 310 USED MACHINE
✓ Verified memberUsed Machine tools for sale ESSA RE 8
✓ Verified memberCOMPLETE WITH PNEUMATIC CLUTCH, MANUAL TOOL LOADING AND FEED LINE
✓ Verified memberOrigin of manufacture Switzerland 380/50/3 voltage Net weight with motor, without base 245-295 kg Normal net foot weight (sicle) 95 kg Customs position 8462.9930 TECHNICAL CHARACTERISTICS TYPE D-8 / D8-200: Maximum power 8 tones Max. section to shear
✓ Verified member
✓ Verified member
✓ Verified memberMake Mios Machine No. PE394 Type T25 Capacity 25 T Tafellengte 525 mm Tafelbreedte 405 mm Strike 70 mm Number of strokes 120 p/min Kantelbaar in degrees Machine dimensions (L×B×H) 1.000 x 900 x 1.950 mm Machinegewicht 1.000 kg
✓ Verified member
✓ Verified memberWhat it is Hertz HGS 7.5 rotary screw air compressor in an acoustic enclosure. It supplies compressed air for workshops with continuous demand. It carries a Sogorbmac dealer label (Elda, Alicante) and an Airmac sticker. Key strengths It is a compact
COM.PIS.OO64 USED MACHINE
✓ Verified memberCutting and sharpening (descent in small sequences programmed for a cleaner cutting side)
✓ Verified memberCOMPLETE WITH PNEUMATIC CLUTCH, SIEMENS SIMATIC MULTI PANEL, TOOL LOADING AND FEED LINE
✓ Verified memberOrigin of manufacture Switzerland 380/50/3 voltage Net weight with motor, without base 245-295 kg Normal net foot weight (sicle) 95 kg Customs position 8462.9930 TECHNICAL CHARACTERISTICS TYPE D-8 / D8-200: Maximum power 8 tones Max. section to shear
✓ Verified member
✓ Verified memberBrand Gorter Type 260 mm ø - 150T Capacity 150 T Stroke 450 mm Throat depth 1.020 mm Table length 1.000 mm Table width 500 mm
Used Norton heavy duty fly press for sale, mounted on steel stand with approximately 12-inch throat capacity. Ideal for fabrication, pressing and workshop applications. Available from Bowland Trading. Norton Heavy Duty Fly Press on steel Table, appro
✓ Verified member
✓ Verified memberPress hydraulic Mas 80 t of occasion The four-column hydraulic press of the Barcelona manufacturer Son of Gaspar Mas, designed for the testing and adjustment of moulds. The control panel includes press, chuck tilt, chuck input and output, extractor,
New05435 7,5 kW USED MACHINE
✓ Verified memberCutting and sharpening (descent in small sequences programmed for a cleaner cutting side)
✓ Verified memberCOMPLETE WITH PNEUMATIC CLUTCH AND TOOL LOADING
✓ Verified memberOrigin of manufacture Switzerland 380/50/3 voltage Net weight with motor, without base 245-295 kg Normal net foot weight (sicle) 95 kg Customs position 8462.9930 TECHNICAL CHARACTERISTICS TYPE D-8 / D8-200: Maximum power 8 tones Max. section to shear
✓ Verified member
✓ Verified memberBrand Ingersoll Rand Type ML 45 Year of make 2005 Screw compressor Workload 8 Bar Tank content 1.000 L Engine power 45 kW Tension 380 V Soundproofed Includes air dryer Exclusive air tank
✓ Verified member
✓ Verified memberPress of the occasion Hidragrup 100 Tn (2000) molding tests press hydraulic 100 tons by manufacturer Hidragrup, of a molding type, for testing, adjustment and testing of molds and matrices. According to our file it is from the year 2000 and has a tab
New03701 USED MACHINE
✓ Verified memberUsed Machine tools for sale ESSA RE 8
✓ Verified memberHyundai Rotem 4-Press Link Motion 4-Point Mechanical Tandem Press Line 1 x Hyundai Rotem 2400-ton Mechanical Press 2 x Hyundai Rotem 1000-ton Mechanical Presses 1 x Hyundai Rotem 800-ton Mechanical Press Bed area - 4600 mm x 2300 mm Slide stroke - 11
✓ Verified member
✓ Verified memberBending machines / Straighteners Fire: TUWI Type: P800 Capacity: 200 T Machine dimensions (lxwxh): 6.000 x 1.500 x 1.800 mm Machine weight: 5.500 kg Machine No.: BG148
✓ Verified member
✓ Verified member
✓ Verified memberMOD. VARIO 7,5 Pressure max 10 Bar Flow rate 1040 l/min Power 7,5 Kw/10 Hp EQUIPPED...
✓ Verified memberUsed Machine tools for sale SCHMIDT PLS12669DA 1.0
✓ Verified memberHitachi Zosen Fukui 4-Press Mechanical Single Action Line 1 x Hitachi Zosen Fukui 1500-ton 4 Point Single Action Servo Mechanical Press Bed area 4500 mm x 2200 mm Slide Stroke 900 mm Shut height 1100 mm 3 x Hitachi Zosen Fukui 1500-ton 4 Point Single
✓ Verified member
✓ Verified memberPresses / Ship building presses Brand: Bakker Capacity: 500 T Distance between columns: 6.000 mm Machine dimensions (lxwxh): 7.500 mm Cylinder in the middle Machine nr.: PE319
✓ Verified memberPress mechanical EMG of 15 TN of occasion (2008) press mechanical EMG of 15 TN according to the title, with year 2008 on our tab. It is a compact press C frame with transparent front protection and its own electric frame, designed for stamping and pu
✓ Verified memberPressure max bar 16 FAD l/min 1825 FAD m3/h 109 W 284 Volt/Hz/Ph 230/50/1 Gas/DN 3/4'' M Approx....
✓ Verified memberUsed Machine tools for sale SCHMIDT PLS12669DA 1.0
✓ Verified memberJier 4-Press Mechanical Single Action Line 1 x Jier 2250 ton Single Action Mechanical Press 3 x Jier 1000-ton Single Action Mechanical Presses Bed area 4600 mm x 2400 mm Slide Stroke 1000 mm Shut height 1350 mm Slide adjustment 500 mm COMPLETE WITH M
✓ Verified memberOrigin of manufacture CE – France 380V/50Hz/3ph voltage Dimensions 230x170x260 cm Net machine weight 8800 kg TECHNICAL CHARACTERISTICS Pressure force 360 T. Table length 440 mm Table width 525 mm Displacement of the 60 column mm Number of hits 60 / M
✓ Verified memberMiscellaneous / Compressors Brand: Agre Year of make: 1986 Tank content: 100 L Machine nr.: C044
✓ Verified memberWhat it is Ingersoll-Rand air compressor from the SSR series, model MH 15 according to the label on the panel. It is supplied without an air receiver, according to our data sheet. It provides compressed air for the workshop. Key strengths According t
SILENCED PISTONS USED MACHINE
✓ Verified memberUsed Machine tools for sale SCHMIDT PLS12669DA 1.0
✓ Verified member2 Off USI Clearing Single Action 4-Point Mechanical Presses, complete with one moving bolster each press through the columns.
✓ Verified memberWith EDFA22E-23-K dryer
✓ Verified memberPresses / Eccentric presses Brand: Richter Type: PEKR80 Capacity: 80 T Table length: 850 mm Table width: 560 mm Stroke: 99 mm Number of strokes: 25 - 70 p/min Air screen security Machine nr.: PE219
✓ Verified memberPiston stroke 150 mm Sheet thickness 3 mm Sheet width 130 mm
✓ Verified memberLiters 500 Bar 11 NEW MATERIAL
✓ Verified member- Set of fixtures : 1 - Workbench : 1 Used Machine tools for sale AXNUM UFM01-C
✓ Verified member2 off Manzoni 630-Ton Mechanical Transfer Presses with Feed Lines
✓ Verified memberReconditioned in 2003 – 4 tonnes
✓ Verified memberMiscellaneous / Compressors Brand: Sullair Type: SEC35E7,5 Capacity: 2.94 m3/min Power: 18.5 kW Working houres: 4.400 Screw compressor With air dryer Machine nr.: C021
✓ Verified memberPiston compressor with air receiver Piston air compressor with a finned head, V-belt drive and electric motor, mounted on a horizontal tank. In the photos it is painted blue and sits on a pallet. Key strengths of this type of equipment A piston compr
✓ Verified memberNew04685 EQUIPED WITH ACCESSORIES USED MACHINE
✓ Verified memberUsed Machine tools for sale SCHMIDT 24-400041
✓ Verified memberCOMPLETE WITH MILLUTENSIL STRAIGHTENER, DECOILER, DIE LIFTERS AND PRE-ROLLERS ****DRAWINGS AVAILABLE UPON REQUEST****
✓ Verified member380V – 15kW – 2 m3/min
✓ Verified memberPresses / Open gap presses Brand: HP Type: 4X150N Capacity: 4 T Table length: 380 mm Table width: 280 mm Stroke: 250 mm Throat depth: 150 mm Daylight: 320 mm Machine nr.: PE057
✓ Verified memberPress mechanical Flex of 20 TN of occasion press eccentric mechanical frame in C with wheel, Flex mark according to our tab, 20 TN according to title. It is used for cutting, cutting and punching sheet in short and medium series. Strengths The C-fram
✓ Verified memberCompressed-air dryer Refrigerating R134a-0,27 Kg Air capacity 2.200 liters/min Power 740 W Max...
✓ Verified memberUsed Machine tools for sale WALTHER-PILOT CUV UNDER PRESSURE MGD 120
✓ Verified memberWeingarten 1600-ton Mechanical Transfer Press with Feed Line COMPLETE WITH 4 CUSHIONS
✓ Verified memberO GuysLETO a.Oo.Oo.Oo. 380/50/3 voltage Net weight machine approx. 2000 kg KEYON, 1160x1070x2075 mm TECHNICAL CHARACTERISTICS announcements Maximum pressure 25-000 kp Cutting surface max. for Ks 40 kg/mm2 625 mm2 Horizontal gauge 200 mm Table area 55
✓ Verified memberMiscellaneous / Compressors Brand: NN Type: 02063 A Work pressure: 120 Bar Tank content: 150 L Air tank Machine nr.: C056
✓ Verified memberPress eccentric mechanical TDEG of 25 TN press C frame mechanics (swan neck) with flyer, TdeG mark according to the frame logo, 25 TN according to title. It is an eccentric belt-drive press, of which are used to hit, punch and cut sheet. Strengths Th
COM.PIS.OO57 Piston powered Tank capacity 600 liters USED MACHINE
✓ Verified memberUsed Machine tools for sale WALTHER-PILOT CUV UNDER PRESSURE MGD 120
✓ Verified member2 x TMP Voronezh 2000-ton Single Action Mechanical Presses COMPLETE WITH UPPER AND LOWER CUSHIONS
✓ Verified memberOrigin of manufacture Switzerland 380/50/3 voltage Net weight with motor, without base 245-295 kg Normal net foot weight (sicle) 95 kg Customs position 8462.9930 TECHNICAL CHARACTERISTICS TYPE D-8 / D8-200: Maximum power 8 tones Max. section to shear
✓ Verified memberMiscellaneous / Compressors Brand: Sullair Type: Trek 11HH Year of make: 2007 Capacity: 1,43 m3/min Work pressure: 10 Bar Power: 11 kW 1460 RPM 400 V 50Hz Hours to be read: 7554 Includes: air tank and dryer Machine nr.: C055
✓ Verified memberPress mechanical Flex of 25 TN of occasion press mechanical eccentric C frame with yellow wheel, Flex mark according to sheet and 25 TN according to title. It is a belt-driven press for cutting and cutting of sheet. Strengths An external electric eng
New03722 35 HP 400 LT/MIN USED MACHINE
✓ Verified memberUsed Machine tools for sale WALTHER-PILOT CUV UNDER PRESSURE MGD 120
✓ Verified member7 x Aida 150-ton Single Action Mechanical Presses
✓ Verified member
✓ Verified memberMiscellaneous / Compressors Brand: Deltech Type: ARA 03 F Work pressure: 15 Bar Voltage: 220 V Air dryer Machine nr.: M772
✓ Verified memberPress eccentric mechanical 60 TN of occasion press eccentric mechanical frame in C of 60 TN according to the title, with protected steering wheel and table with output hole. The photos do not show any brand or feature plate. Strengths The C-frame lea
Motor power 5,5/7,5 KW/Hp Pressure Bar 10 EQUIPPED WITH: -Dryer USED MACHINE
✓ Verified memberUsed Machine tools for sale ESSA PLA 15
✓ Verified memberAida 150-ton Single Action Mechanical Press with coil feed: Direction Left to right Width 457 mm Thickness 6 mm Adjustment height 170-240 mm Tolerance 0.1 mm
✓ Verified member
✓ Verified memberPresses / Eccentric presses Brand: Gosmeta Type: EPR-80 Capacity: 80 T Table length: 665 mm Table width: 535 mm C-Frame Single column Machine nr.: PE357
✓ Verified memberABAC Silent LN 7.5 HP piston compressor ABAC Silent LN soundproofed piston compressor, with 7.5 HP marked on the housing, for producing compressed air in the workshop. Model features According to ABAC, the LN Silent range uses a sheet metal cover lin
✓ Verified memberNominal flow rate l/min 4900 Max air pressure bar 14 Max intel air temperature °C 55 Ambient...
✓ Verified memberUsed Machine tools for sale ESSA PLA 15
✓ Verified memberWhat is it and what is it for? press eccentric mechanical 15 TN according to the title of our sheet, with C frame and side inertia wheel, suitable for cutting, punching and forming of fine sheet in series. Configuration of this unit Type: mechanical
✓ Verified memberHYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Cnc Siemens Simatic HMI Adjustable maximum slide force...
✓ Verified memberPress of occasion Gamei PHG 300/400 Gamei PHG 300/400 is a press stamping of the PHG series, which the Gamei catalogue presents as "presses percussion to spindle." It is used in stamping and forging of metal parts. Model characteristics The photos sh
✓ Verified memberOLEODIDAMIC PRESS FAVOLE mod. DM 1000/250T Adjustable nominal force 1.000 Ton Nominal return force...
✓ Verified memberUsed 500-litre vertical air receiver Vertical compressed air receiver, 500 litres according to our data sheet, for storing air in a workshop installation. In the photo it is connected to the pipework, with a pressure gauge and outlet hose. Configurat
✓ Verified memberTotal press power 800 + 350 tons Pistons: n.2 tons 800 Return power ton 100 Mobile table stroke or...
✓ Verified memberBottarini KDV 30 screw compressor The Bottarini KDV 30-7.5 EANA is an air compressor from the Italian firm Bottarini (Lonate Pozzolo, Varese). It produces compressed air for the pneumatic tools and machines of a workshop or industrial premises. What
✓ Verified memberClamping force 300 ton Opening force 100 ton Operating pressure 250 bar Platen overall dimensions...
✓ Verified memberWhat is it? The Gamei PHG 400/560 is a press stamping of the PHG series, described by the manufacturer as press percussion to spindle, for forging and hot stamping of steel parts and other metals. Gamei, S.A. is a manufacturer of Mondragón (Gipuzkoa)
✓ Verified memberClamping force 200 ton Opening force 85 ton Sliding table dimensions 3.000 x 2.300 mm Table stroke...
✓ Verified memberWhat is it? Gamei PHG 300/400 is a press stamping of the PHG series, described by the manufacturer as press percussion to spindle, used in forging and hot stamping of steel, brass and other metals. Gamei, S.A. is a manufacturer of Mondragón (Gipuzkoa
MECHANICAL DOUBLE COLUMN OPM2-250 Power 250 T Working table mm 2200x1200 Strokes/min n. 24 Max...
✓ Verified memberPress of occasion Gamei PHG 75/100 Gamei PHG 75/100 is a press of the PHG series, which the Gamei catalogue presents as "presses of percussion to spindle," smaller than the PHG 300/400. Model characteristics The photos show a protected steering wheel
CNC DELEM DA-69W 8 CONTROLLED AXES Max working force Ton. 350 Useful bending length 4100...
✓ Verified memberWhat is it? press eccentric mechanical 100 Tm, for framing, cutting and cutting of sheet in series production. According to our tab it is of the brand Smeral and of model LEX 100; in the photos there is no sign or plate to confirm it. Strengths Accor
✓ Verified memberOLEODINAMIC PRESS MOSSINI mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1.000 Work table...
✓ Verified memberWhat is it? press hydraulic four-column Hidragrup, 60 Tm, for adjustment and testing of moulds (press moldist). It is used in mould and matrices workshops to check the closure, support and operation of mould before taking them to production. Strength
✓ Verified memberNr 2 connecting rods Capacity 400 ton Table 2500 x 1550 mm Ram 2200 x 1200 mm Stoke 300 mm PMI 600...
✓ Verified memberPress mechanical Erfurt PEE 160/315 occasion The press plate of this manufacturer VEB Pressen- und Scherenbau Erfurt identifies it as PEE 160/315, 35771 machine No, with maximum pressure force of 160 t. Model characteristics According to the plate, t
✓ Verified memberC-FRAME PRESSES Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55...
✓ Verified memberWhat is it and what is it for? The BEN PED-63 is a C-frame mechanical press with protected inertia wheel, of 63 TN according to the title of our sheet, intended for cutting, punching, grinding and serial sheet forming. Configuration of this unit Bran
✓ Verified memberNew01648 C- TYPE -table size mm.1300x750 -size sledge hammer mm.1110x660 -day light / sledge hammer...
✓ Verified memberPress eccentric mechanics of 25 tons The Smeral LEN 25 is a press mechanical force C frame of the manufacturer Šmeral's LEN series. It is used for printing, cutting and light cutting of sheet in short and medium series. Strong points of the series Th
4 COLUMNS Max power KN 4000 Max pressure Bar 200 Piston diameter mm 505 Stroke of moving bench mm...
✓ Verified memberMax ram force 250 tons Max blank holder force 125 tons Max ram stroke 800 mm Max blank holder...
✓ Verified memberMECHANICAL DOUBLE COLUMN PRESSES S2-400-1600 Ã 1220 / E Nominal force: kN 4000 Slide stroke:...
✓ Verified memberNominal force: 1000 kN Weight: 7,000 kg Strokes per minute: 65 Maximum insertions per minute:...
✓ Verified memberC-FRAME PRESS Nominal force kN 1.050 Mass Kg 6.400 Nominal stroke rate 60 strokes/min Operating...
✓ Verified memberNominal force: 500 kN Weight: 5.000 kg Strokes per minute: 73 Maximum insertions per minute:...
✓ Verified memberMax pressure ton 200 Stroke mm 200 Max distance between table and slide mm 800 Table dimensions mm...
✓ Verified memberCNC ESA S 530 Force ton 250 Bending lenght mm 2500 Distance between center mm 2000 Gap mm...
BIL.FRZ.OO45 -SCREW DIAMETER MM.140 -LIGHT BETWEEN UPRIGHTS UNDER THE RAILS MM.380 -WIDTH BETWEEN THE UPRIGHTS...
✓ Verified member-Maximum pressure Ton 120 -Strokes per minute c.a. 55 -Adjustable ram stroke mm.20-120 -Table size:...
HYDRAULIC WITH MOVABLE PISTON Power Ton 300 Distance between frames mm 1500 Gap mm 910 Piston...
✓ Verified memberPRS.STA.OO14 STROKE mm.140 STROKE / Min Nr. 120 BED SIZE mm 500 X 530 DISTANCE BETWEEN BED AND SLEDGE HAMMER...
Nominal force: kN 500 Min./max. slide stroke: mm 8÷100 Max. slide adjustment closed height:...
✓ Verified memberPRS.ODM.O249 17O/1OOOX8OO (CROPI) Max force Ton 170 blank holder Ton 85 Force extractor sup. Ton 10...
✓ Verified memberNEW01311 ECCENTRIC WORKING STATION NR.06 STROKE MM.120 STUFFING STROKE MM.42 USED MACHINE
MOULD AND DIE PRESS TEST Removable and tilting table Max closing force Ton 20 MAx opening force Ton...
✓ Verified memberPRS.OCG.OO42 PISTON: N°2 TON.160 RETURN POWER TON.20 MOVING PLANE OR PISTON STROKE [APPROX.] MM.500 MAX...
✓ Verified memberC-FRAME PRESSES Nominal force: kN 350 Adjustable stroke: mm 11÷78 Strokes per minute:...
✓ Verified memberNominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7-60 mm Stop Position: TDC Ram...
✓ Verified memberNew02627 ECCENTRIC C-TYPE WITH FRICTION BED SIZE MM. 1000X690 SIZE SLEDGE HAMMER MM. 540X310 HOLE SIZE...
✓ Verified memberNEW03376 C- TYPE BED SIZE MM.1200x950 SIZE SLEDGE HAMMER MM.720x440 DAY LIGHT BED- SLEDGE HAMMER...
✓ Verified memberMaximum capacity kN 200 Max working length mm 1250 Max working thickness mm 4 Max tool length mm...
✓ Verified memberC-FRAME PRESSES Free passage between the uprights mm: 220 Distance between the connecting rod...
✓ Verified memberNew03164 BED MM.1500x1000 STROKE MM.1000 DIE CUSHION 60 TON. USED MACHINE
New05692 Table dimensions 750x450 mm Distance between centers mm 350 Slide travel mm 0-110 Slide adjustment...
✓ Verified memberNew02624 TECHNICAL CHARACTERISTICS -Capacity Ton. 100 -stroke mm.25-130 -strokes/min N. 90 -Min distance...
PISTON DIAMETER TABLE MM 2950 x 400 [ 500 AL CENTRO] TRAVEL MM 450 MAX DISTANCE BETWEEN COLUMNS MM...
✓ Verified memberPRESS GMR ART.325 Force Ton 100 Ton Distance between frames mm 1000 Max pressure 400 bar Stroke mm...
C TYPE Power Ton Bed size mm Ram size mm Distance surface table / ram mm Adjustable stroke da mm....
✓ Verified memberPRS.OLE.O259 HOLEODINAMIC 4 COLUMNS PRESSURE TON 13O DIAM COLUMNS MM 12O BED SIZE MM.700x360 DAYLIGHT...
✓ Verified memberPRS.ECG.O239 * Power 30 T * speed 70 * 140 strokes/min. * Engine MBM 8 HP * Max stroke 150 mm. *...
✓ Verified memberPRS.ODM.O244 MAX PRESSURE 40 TON. WITH 2 ROTARY SPINDLE DIAM. MM.600 USED MACHINE
PRS.OLE.O261 OLEODYNAMIC 4 COLUMN USED MACHINE
✓ Verified memberNew02625 USED MACHINE
✓ Verified memberNew03856 BEDS SIZE: mm 900X 650 DAY LIGHT: mm 400 USED MACHINE
✓ Verified memberPRS.EDM.O1O8 Bed size 1000x1000 mm Size sledge hammer 1000x700 mm Day light bed- sledge hammer 650 mm Lateral...
PRS.PLA.O264 INJECTION CT ITALY USED MACHINE
PRS.OLE.O262 HOLEODINAMIC PRESS 4 COLUMNS DAYLIGHT BETWEEN COLUMNS 490 X 260 MM. DAYLIGHT BED- SLEDGE HAMMER...
NEW03378 Piston diameter mm 140 Plan mm 400 x 400 Light between the planes mm 400 about MACCHINA used
✓ Verified memberTABLE MM 4150 X 450 DISTANCE COLUMN - CENTRE PISTON MM 280 PISTON DIAMETER MM 160 USED MACHINE
✓ Verified memberBending length 3000 mm Force Ton 80 USED MACHINE
New05591 Table dimensions mm 800x700 Adjustable stroke mm 150 USED MACHINE
✓ Verified memberNew05592 Table dimension mm 500x500 Adjustable stroke USED MACHINE
✓ Verified memberNew04738 BED SIZE MM 350X450 VERTICAL DAY LIGHT MM 450 DAY LIGHT BETWEEN COLUMNS MM 350 400 KG/CM2 USED...
PRS.OLE.O296 OLEODINAMIC Table mm 420 x 380 USED MACHINE
PRS.ECG.O23O Table size 500 x 500 mm Upper table size mm 500 x 280 Distance between columns mm 290 in in both...
✓ Verified memberPRS.OCG.O329 table dimention mm 280 x 280 light mm 250 USED MACHINE
✓ Verified memberScrew diameter mm 60 USED MACHINE
PRS.OLE.O26O TABLE DIMENTION MM 300 X 250 LIGHT MM 600 USED MACHINE
✓ Verified memberScrew diameter mm 50 USED MACHINE
Table 650x300 mm USED MACHINE
✓ Verified memberNew02845 430 X 350 mm MAX OPENING HEIGHT 500 mm USED MACHINE
✓ Verified memberPRS.OLE.O258 USED MACHINE
✓ Verified memberModel New Max 2 XW 200.30 USED EQUIPMENT
FORCE 5 TON USED MACHINE
✓ Verified memberNOMINAL FORCE kN 10.000 Force kN 20.000 Screw diameter mm 315 Max usable energy Kgm 12.000 Slide...
CNC DELEM DA-69W 8 CONTROLLED AXES Max working force Ton. 350 Useful bending length 4100 mm Passage...
USED MACHINE
✓ Verified memberOLEODINAMIC PRESS MOSSINI mod. PO/2M 400 Working power adjustable Ton from 40 to 400 Return power...
✓ Verified memberMOD. TUS 130-100 CNC SIEMENS SIMATIC S5-100U Press force kN 1000 Ritraction force kN 450 Clamping...
✓ Verified memberOLEODINAMIC Lenght mm 6250 Bending capacity mild steel mm 25x4350 Full tonnage ton 750 Tonange in...
✓ Verified memberC-FRAME PRESSES Nominal force: 1300 kN Nominal stroke: 7.5 mm Adjustable stroke: 16÷200 mm Stop...
✓ Verified member3100x175 6-AXIS TON SYNCHRONIZED HYDRAULICS TECHNICAL FEATURES: Bending power 175 tons Bending...
HYDRAULIC 4 AXIS Max force Ton 200 Bending lenght mm 4200 Distance between frames mm 3550 Throath...
✓ Verified memberNew03285 -Bed lenght mm.3100 -Distance between frames mm.2750 -Force Ton. 130 -Throat depth mm.300 -Ram...
CNC 4 AXIS ALPHANUMERIC Max force Ton 160 Bed lenght mm 3200 Distance between frames mm 2800 Throat...
CNC 6 AXIS Bending lenght mm 3000 Max force Ton 130 Throath depth mm 410 Stroke mm 200 Machine...
Bed lenght mm 4050 Max force Ton 80 USED MACHINE
✓ Verified memberPower ton 230 Table size mm 610x700 Stroke mm 800 USED MACHINE
Diameter pistons mm 110 Lenght pistons approx mm 350/400 Dimension mm 1500 x 1900 H mm 1300 USED...
Max load 70 Max pressure Bar 350 Approach speed mm/sec 20 Working speed mm/sec 2 Stroke cylinder...