




Hidragroup 50 t die spotting press
Technical specification
| Category | Presses with mechanical driving |
| Make | HIDRAGROUP |
| Condition | Used |
| Location | Spain |
Description
Hidragroup 50 t die spotting press
Hydraulic press for the adjustment and touching-up of moulds, known in the workshop as a die spotting or inking press. It allows the two halves of a mould or die to be closed under controlled pressure to check the contact between surfaces and adjust closures and parting lines before taking the tool to the injection machine or production press.
Main features
Its key element is the removable lower platen: the lower half of the mould slides out of the pressing zone so that the fitter can work on it comfortably and then moves back in for a new closing. The daylight between platens, from 400 to 1,200 mm, allows moulds of considerable height to be worked with a force of 50 t. The photos show perimeter mesh guards and a separate control cabinet with push buttons.
Configuration of this unit
Force: 50 t
Minimum / maximum daylight between platens: 400 / 1,200 mm
Removable lower platen: yes
Perimeter mesh guards (photos 1 and 2)
Separate control cabinet with push buttons (photos 2 and 3)
Weight: 6,500 kg
Typical applications
Mould shops for plastic injection, blow moulding or die casting, die-making shops and tooling maintenance departments: checking closures, adjusting parting lines and verifying slides.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Hydraulic press for the adjustment and touching-up of moulds, known in the workshop as a die spotting or inking press. It allows the two halves of a mould or die to be closed under controlled pressure to check the contact between surfaces and adjust closures and parting lines before taking the tool to the injection machine or production press.
Main features
Its key element is the removable lower platen: the lower half of the mould slides out of the pressing zone so that the fitter can work on it comfortably and then moves back in for a new closing. The daylight between platens, from 400 to 1,200 mm, allows moulds of considerable height to be worked with a force of 50 t. The photos show perimeter mesh guards and a separate control cabinet with push buttons.
Configuration of this unit
Force: 50 t
Minimum / maximum daylight between platens: 400 / 1,200 mm
Removable lower platen: yes
Perimeter mesh guards (photos 1 and 2)
Separate control cabinet with push buttons (photos 2 and 3)
Weight: 6,500 kg
Typical applications
Mould shops for plastic injection, blow moulding or die casting, die-making shops and tooling maintenance departments: checking closures, adjusting parting lines and verifying slides.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/hidragroup-50-t-die-spotting-press
