







Press SXKH 300ES2520
Technical specification
| Category | Presses with mechanical driving |
| Condition | Used |
| Location | Gardone Val Trompia, Italy |
Description
CHAPTER
Size Plans
2500x2000 mm98,43x78,74 in
Distance between columns
2300 / 2870 mm90,55 / 112,99 in
Distance min between floors
400 mm15,75 in
Max distance between floors
2500 mm98,43 in
Max weight on the lower floor
22000 Kg
Max weight on top floor
42000 Kg
Max closing force
3000 kN
Max opening force
700
Lower floor overhaul
opt. 70
Upper floor overhaul
180 °
Lower floor rotation
opt. 360
Notes
Part Make Display Screen Siemens HMI - Germany Computer (PLC) Siemens S7-1200 – Germany Main Servo Motor PHASE – ITALY Servo Drive Delta- Taiwan China Oil Motor Eaton-US Solenoid Valves Vickers – US Relief Valves Vickers – US Seal Rings NOK - Japan Contactor Schneider - France Encoders Kubler - Germany Limit Switches Omron - Japan Safety light Curtain Sick-German
CNC
CNC
Siemens PLC S7-1200
Measuring system
Encoders
ADVANCED
Approach speed
80 mm/sec
Working speed
8 mm/sec
Notes
Two Mechanical Safety locks at each side to ensure the upper platen can be locked at any position when upper platen goes up or down. This Device is mandatory by EC rules.
EXTRA
Total installed power
30 Kw
weight machine
61.000 kg
Machine encumbrance
6800x3000x7300 mm267,72x118,11x287,40 in
Notes
5.1 There are totally four encoders at each corners of the moving base. 5.2 The PLC screen shows the state of how these four encoders working continuous. The date will be shows for the whole strokes; this means the parallelism between two platens can be monitor continuous. 5.3During the Moldova protection function if the difference is more than the setting, the machine will stop immediately. This means if the employee leave some tools inside Moldova, when the upper Moldova touch the tools, the machine will stop immediately. This function will help to protect the Moldova before damaged.
Size Plans
2500x2000 mm98,43x78,74 in
Distance between columns
2300 / 2870 mm90,55 / 112,99 in
Distance min between floors
400 mm15,75 in
Max distance between floors
2500 mm98,43 in
Max weight on the lower floor
22000 Kg
Max weight on top floor
42000 Kg
Max closing force
3000 kN
Max opening force
700
Lower floor overhaul
opt. 70
Upper floor overhaul
180 °
Lower floor rotation
opt. 360
Notes
Part Make Display Screen Siemens HMI - Germany Computer (PLC) Siemens S7-1200 – Germany Main Servo Motor PHASE – ITALY Servo Drive Delta- Taiwan China Oil Motor Eaton-US Solenoid Valves Vickers – US Relief Valves Vickers – US Seal Rings NOK - Japan Contactor Schneider - France Encoders Kubler - Germany Limit Switches Omron - Japan Safety light Curtain Sick-German
CNC
CNC
Siemens PLC S7-1200
Measuring system
Encoders
ADVANCED
Approach speed
80 mm/sec
Working speed
8 mm/sec
Notes
Two Mechanical Safety locks at each side to ensure the upper platen can be locked at any position when upper platen goes up or down. This Device is mandatory by EC rules.
EXTRA
Total installed power
30 Kw
weight machine
61.000 kg
Machine encumbrance
6800x3000x7300 mm267,72x118,11x287,40 in
Notes
5.1 There are totally four encoders at each corners of the moving base. 5.2 The PLC screen shows the state of how these four encoders working continuous. The date will be shows for the whole strokes; this means the parallelism between two platens can be monitor continuous. 5.3During the Moldova protection function if the difference is more than the setting, the machine will stop immediately. This means if the employee leave some tools inside Moldova, when the upper Moldova touch the tools, the machine will stop immediately. This function will help to protect the Moldova before damaged.
Listing text machine-translated into English from Italian. Make and model are as supplied by the dealer.
Imported from the Gamba Giovanni Srl stock feed (https://www.gambamacchine.it/sitemap.xml). Source listing: https://www.gambamacchine.it/macchine-utensili-usate/pressa/rivendita-pressa-prova-stampi-sxkh-300es2520-usata-242923
