





Press Flex 25 t
Technical specification
| Category | Presses with mechanical driving |
| Make | FLEX |
| Condition | Used |
| Location | Spain |
Description
Press mechanical Flex of 25 TN of occasion
press mechanical eccentric C frame with yellow wheel, Flex mark according to sheet and 25 TN according to title. It is a belt-driven press for cutting and cutting of sheet.
Strengths
An external electric engine moves the steering wheel by strap and the C frame leaves front access to the utility. In the photos you can see the eccentric axis and the yellow car, with the working table and its piece output hole.
Configuration of this unit
Flex mark (sheet; "flex" annotated model); 25 TN (title)
Type: press mechanical frame in C
Yellow wheel with protective and belt transmission from an external engine
Cáncamo lifting on the frame
Pump counter on the frame
Traction box with pushers on the side
Typical applications
Troquelado, cutting and punching of sheet in production series, and manufacture of small printed parts.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
press mechanical eccentric C frame with yellow wheel, Flex mark according to sheet and 25 TN according to title. It is a belt-driven press for cutting and cutting of sheet.
Strengths
An external electric engine moves the steering wheel by strap and the C frame leaves front access to the utility. In the photos you can see the eccentric axis and the yellow car, with the working table and its piece output hole.
Configuration of this unit
Flex mark (sheet; "flex" annotated model); 25 TN (title)
Type: press mechanical frame in C
Yellow wheel with protective and belt transmission from an external engine
Cáncamo lifting on the frame
Pump counter on the frame
Traction box with pushers on the side
Typical applications
Troquelado, cutting and punching of sheet in production series, and manufacture of small printed parts.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-flex-25-tn
