



Press Erfurt 160/135
Technical specification
| Category | Presses with mechanical driving |
| Make | ERFURT |
| Condition | Used |
| Location | Spain |
Description
Press mechanical Erfurt PEE 160/315 occasion
The press plate of this manufacturer VEB Pressen- und Scherenbau Erfurt identifies it as PEE 160/315, 35771 machine No, with maximum pressure force of 160 t.
Model characteristics
According to the plate, the stroke of the car is from 32 to 112 mm with a 100 mm clamp, and gives 50 blows per minute in vacuum. The maximum depth of the injection is 50 mm, with 80 t at that point. The press carries an aluminium grid cage on the front, a wheel with a deck and an electric frame on the side.
Configuration of this unit
Model: PEE 160/315 (plate)
Machine No: 35771 (plate)
Maximum pressing force: 160 t
Car stroke: 32-112 mm; car regulation: 100 mm
Vacuum beats: 50 per minute
Table dimensions: 800 x 560 mm (sheet)
External measures: 1.500 x 2.600 x 3.100 mm (sheet)
Typical applications
Stamping, cutting and cutting of sheet in series.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The press plate of this manufacturer VEB Pressen- und Scherenbau Erfurt identifies it as PEE 160/315, 35771 machine No, with maximum pressure force of 160 t.
Model characteristics
According to the plate, the stroke of the car is from 32 to 112 mm with a 100 mm clamp, and gives 50 blows per minute in vacuum. The maximum depth of the injection is 50 mm, with 80 t at that point. The press carries an aluminium grid cage on the front, a wheel with a deck and an electric frame on the side.
Configuration of this unit
Model: PEE 160/315 (plate)
Machine No: 35771 (plate)
Maximum pressing force: 160 t
Car stroke: 32-112 mm; car regulation: 100 mm
Vacuum beats: 50 per minute
Table dimensions: 800 x 560 mm (sheet)
External measures: 1.500 x 2.600 x 3.100 mm (sheet)
Typical applications
Stamping, cutting and cutting of sheet in series.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-erfurt-160-135-n-35771
