









Press Smeral 25 t mod. LEN-25
Technical specification
| Category | Presses with mechanical driving |
| Make | SMERAL |
| Condition | Used |
| Location | Spain |
Description
Press eccentric mechanics of 25 tons
The Smeral LEN 25 is a press mechanical force C frame of the manufacturer Šmeral's LEN series. It is used for printing, cutting and light cutting of sheet in short and medium series.
Strong points of the series
The open frame presses are accessible on three sides, which facilitates the loading and unloading of parts and thicknesses. This unit has an adjustable course from 8 to 85 mm and adjustable speed between 76 and 155 blows per minute, allowing the cycle to be adapted to the utility.
Configuration of this unit
Model: LEN 25; type: mechanical
power (force): 25 t
Course: 8-85 mm
Table dimensions: 560 x 435 mm
Bugs per minute: 76-155
Table with T-slots and central output hole
Electric cabinet with sectionator, push-buttons, selectors and counter; push-button control under the table
Typical applications
Cutting and punching of sheet, printing of small pieces, folding light and formed in caldería workshops, metal components and appliances.
See her in Ferrotall
The press is located in our facilities in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Smeral LEN 25 is a press mechanical force C frame of the manufacturer Šmeral's LEN series. It is used for printing, cutting and light cutting of sheet in short and medium series.
Strong points of the series
The open frame presses are accessible on three sides, which facilitates the loading and unloading of parts and thicknesses. This unit has an adjustable course from 8 to 85 mm and adjustable speed between 76 and 155 blows per minute, allowing the cycle to be adapted to the utility.
Configuration of this unit
Model: LEN 25; type: mechanical
power (force): 25 t
Course: 8-85 mm
Table dimensions: 560 x 435 mm
Bugs per minute: 76-155
Table with T-slots and central output hole
Electric cabinet with sectionator, push-buttons, selectors and counter; push-button control under the table
Typical applications
Cutting and punching of sheet, printing of small pieces, folding light and formed in caldería workshops, metal components and appliances.
See her in Ferrotall
The press is located in our facilities in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-smeral-25tn-mod-len-25
