Mori Seiki - NL2500/1250

  • ПроизводительMori Seiki
  • МодельNL2500/1250
  • Инвентарный номер23132009
  • Год выпуска2006

Технические данные

  • Диаметр обработки25 mm
  • Длина обточки0 mm
  • Количество инструментальных позиций0
  • ЧПУ МаркаFanuc
  • ЧПУ Модель0

Netweight 7200 kg
Dimensions 4328x2134x2217 mm
(with conveyor 4328x711 mm)


TECHNICAL DATA

Standard data

2 axes turning center MORI SEIKI NL 2500 x 1250 

Capacity :
Max turning diameter Ø 356 mm 
Standard turning diameter Ø 275 mm
Swing over bed Ø 923.8 mm 
Swing ober cross-slide Ø 755 mm 
Between centres 1250 mm 
Max machining length 1298 mm 
Bar work capacity 80 mm (limited depending on chuck and 
cylinder type)

Travel  X 260 mm
Travel Z 1345 mm 

Main spindle1 : 4000 min-1 (depending on restrictions  
Imposed by work clamping device, jig and 
tool used, it may not be possible to rotate 
at maximum spindle speed)
Number of spindle speed ranges 2
Spindle nose type JIS A2-8
Through-spindle hole Ø 91 mm 
Inner Ø of spindle bearings 140 mm
Chuck Ø 250 mm

Turret : 12 posts (or 10 posts)
Height of angled tool shank section 25 mm
Diameter of boring bar shank section 50 mm

Rapid traverse rate X / Z : 30 m/min
Jog feedrate 0 to 5 m/min
 
Tailstock travel : 1284 mm 
Tailstock spindle diameter 110 mm
Tailstock spindle taper hole MT5


Spindle 1 drive motor 18.5/15 kW 
Feed motors X / Z 3.5 kW
Hydraulic pump motor 1.5 kW
Lubricant pump motor 0,02 kW
Coolant pump motor 0.52 kW
Oil cooler pump motor 0.5 kW compressor
0.4 kW circulating pump

Electrical supply 28.3 kVA

Oil tank capacity 10 L
Lubricant tank capacity 4 L
Coolant tank capacity 345 L
Oil-temperature controller capacity 10 L

Options : 
Chips conveyor
Tailstock
Touch-test

errors and omissions excepted-data given without obligation


Inventory Nr. 3132009, machine with : 

3-jaws chuck Kitagawa BB210A8, Ø 254 mm., A2-8 direct mounting, passage Ø 80 mm., max 3600 min-1

12 Stations with fix tools
Touch-test
Chips conveyor
Between centres 1250 mm
Tailstock 

Дилер: SCEMAMA SA

SCEMAMA SA
Запросить цену