




















Workbench drilling GUILLARDON GT 16
Technical specification
| Category | Drilling |
| Model | GT 16 |
| Condition | Used |
| Location | Ensisheim, France |
| Cone | CM2 |
| Spindle exit | 150 mm |
| Rotation | from 150 to 3000 RPM |
| Table size | 400 x 400 mm |
| Rotation | right / left |
| Throat depth | 280 mm |
| Spindle diameter | Ø 60 mm |
| Column Ø | Ø 105 mm |
| Motor | 2 speeds motor |
| Various | Speed variation by belt drive |
| Various | Non-functional electronic drive |
| Various | Manual Descent |
| Various | Maxi height mandrel/table: 450 mm |
| Various | Mini height mandrel/table: 150 mm |
| Various | Sold with the table |
| Voltage | 380 V |
| Width | 500 mm |
| Depth | 900 mm |
| Total height | on the table in high position: 2100 mm |
| Total height | on the table in a low position: 1700 mm |
| Weight | approx 350 kg |
Imported from the Retec Machines SA stock feed (https://www.retec-machines.com). Source listing: https://www.retec-machines.com/perceuses/perceuse-a-colonne-d-etabli-guillardon-gt-16.html?langue=en
