Home / Metal cutting / Turning (Automatics, Borers and Lathes) / Vurcon EL50 × 1000 electronic cycle lathe



Vurcon EL50 × 1000 electronic cycle lathe
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | Vurcon |
| Condition | Used |
| Location | Spain |
Description
The Vurcon EL50 × 1000 is an electronic cycle lathe: it is operated like a conventional lathe, with handwheels on X and Z, but automatically runs turning, facing, threading and copying cycles that the operator enters on a touchscreen, with no ISO code programming. It swings Ø 500 mm over the bed and Ø 300 mm over the cross slide, takes workpieces up to 1,000 mm and comes with a Ø 250 mm chuck. The A11 spindle runs at 20-2,000 rpm (stepless control) with 11 kW and 650 Nm, with a Ø 104 mm spindle bore. It weighs 2,100 kg.
What it is used for
One-off parts, prototypes and short runs with a lot of variety.
Industrial maintenance and repair shops.
First CNC lathe in the workshop or operator training.
Standard equipment
Cycle control with touchscreen, constant cutting speed and electronic handwheels on X/Z.
Servo motors and ball screws on X and Z.
4-position quick-change turret (tool 25 × 25 mm) and manual tailstock with revolving centre.
Fixed steady rest 20-125 mm and travelling steady rest 20-80 mm, automatic lubrication, swarf tray and full enclosure.
The EL50 series is also available with 1,500, 2,000 and 3,000 mm workpiece length.
Vurcon is the CNC machinery brand of Ferrotall Group. Ferrotall takes care of sales, transport, commissioning and training at your workshop, with its own service engineers and spare parts in Spain. Ask us for a quote with the configuration you need.
What it is used for
One-off parts, prototypes and short runs with a lot of variety.
Industrial maintenance and repair shops.
First CNC lathe in the workshop or operator training.
Standard equipment
Cycle control with touchscreen, constant cutting speed and electronic handwheels on X/Z.
Servo motors and ball screws on X and Z.
4-position quick-change turret (tool 25 × 25 mm) and manual tailstock with revolving centre.
Fixed steady rest 20-125 mm and travelling steady rest 20-80 mm, automatic lubrication, swarf tray and full enclosure.
The EL50 series is also available with 1,500, 2,000 and 3,000 mm workpiece length.
Vurcon is the CNC machinery brand of Ferrotall Group. Ferrotall takes care of sales, transport, commissioning and training at your workshop, with its own service engineers and spare parts in Spain. Ask us for a quote with the configuration you need.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vurcon-el50-x-1000-electronic-cycle-lathe
