








Vertical machining centre Quaser MV154PL-12
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Quaser MV154 PL/12 vertical machining centre
The Quaser MV154 PL/12 is a vertical machining centre with a 12,000 rpm spindle (as marked on the machine) and 1,020 mm of X-axis travel. It is suited to small and medium-sized parts in aluminium and steel, repeat batches, tooling and precision components.
Key strengths
The machine carries a Big-Plus marking, a spindle system with simultaneous face and taper contact. It is fitted with a Heidenhain control with screen and alphanumeric keyboard; according to our data sheet it includes a tool changer, through-tool coolant and a swarf conveyor. In the photos, the control screen shows a disk boot error message, so the condition of the control must be checked before any purchase.
Configuration of this unit
Model MV154 PL/12, year 2005
Heidenhain 530 i TNC control (according to data sheet)
Table: 1,250 x 500 mm
X/Y/Z travels: 1,020 / 500 / 500 mm
12,000 rpm spindle, Big-Plus system (marked on the machine)
Through-tool coolant
Tool changer and swarf conveyor
Overall dimensions: 2,470 x 2,540 x 2,830 mm; weight: 6,850 kg
Typical applications
Milling, drilling and tapping of parts within the 1,020 mm X-axis travel, with high spindle speed for aluminium and fine finishing.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Quaser MV154 PL/12 is a vertical machining centre with a 12,000 rpm spindle (as marked on the machine) and 1,020 mm of X-axis travel. It is suited to small and medium-sized parts in aluminium and steel, repeat batches, tooling and precision components.
Key strengths
The machine carries a Big-Plus marking, a spindle system with simultaneous face and taper contact. It is fitted with a Heidenhain control with screen and alphanumeric keyboard; according to our data sheet it includes a tool changer, through-tool coolant and a swarf conveyor. In the photos, the control screen shows a disk boot error message, so the condition of the control must be checked before any purchase.
Configuration of this unit
Model MV154 PL/12, year 2005
Heidenhain 530 i TNC control (according to data sheet)
Table: 1,250 x 500 mm
X/Y/Z travels: 1,020 / 500 / 500 mm
12,000 rpm spindle, Big-Plus system (marked on the machine)
Through-tool coolant
Tool changer and swarf conveyor
Overall dimensions: 2,470 x 2,540 x 2,830 mm; weight: 6,850 kg
Typical applications
Milling, drilling and tapping of parts within the 1,020 mm X-axis travel, with high spindle speed for aluminium and fine finishing.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-quaser-mv154pl-12
