





Vertical machining centre Quaser MV154PL-12
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
Quaser MV 154 PL-12 vertical machining centre
The Quaser MV 154 PL is a vertical machining centre from the Taiwanese manufacturer Quaser, with a 12,000 rpm high-speed spindle, suited to machining medium-sized parts in mould making, tooling and subcontract work. Its table measures 1,200 x 500 mm.
Key strengths
According to other listings for the same model, the MV 154 PL series is offered with a BT 40 taper and a 30-tool magazine. The 12,000 rpm and through-tool coolant favour the machining of aluminium and steel and finishing work.
Configuration of this unit
Model: Quaser MV 154 PL-12 (Ferrotall label on the machine)
Control: Heidenhain 530 i TNC (per data sheet)
Table: 1,200 x 500 mm
X, Y, Z travels: 1,020 x 500 x 500 mm
Spindle speed: 12,000 rpm
Through-tool coolant: yes
Tool changer: yes
Swarf conveyor: yes
Year: 2005
Overall dimensions: 2,470 x 2,540 x 2,830 mm
Weight: 6,850 kg
Typical applications
Milling of moulds and dies, tooling parts, aluminium and steel with fine finishes, medium-batch production and subcontract work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Quaser MV 154 PL is a vertical machining centre from the Taiwanese manufacturer Quaser, with a 12,000 rpm high-speed spindle, suited to machining medium-sized parts in mould making, tooling and subcontract work. Its table measures 1,200 x 500 mm.
Key strengths
According to other listings for the same model, the MV 154 PL series is offered with a BT 40 taper and a 30-tool magazine. The 12,000 rpm and through-tool coolant favour the machining of aluminium and steel and finishing work.
Configuration of this unit
Model: Quaser MV 154 PL-12 (Ferrotall label on the machine)
Control: Heidenhain 530 i TNC (per data sheet)
Table: 1,200 x 500 mm
X, Y, Z travels: 1,020 x 500 x 500 mm
Spindle speed: 12,000 rpm
Through-tool coolant: yes
Tool changer: yes
Swarf conveyor: yes
Year: 2005
Overall dimensions: 2,470 x 2,540 x 2,830 mm
Weight: 6,850 kg
Typical applications
Milling of moulds and dies, tooling parts, aluminium and steel with fine finishes, medium-batch production and subcontract work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-quaser-mv154pl-12-ref-058987
