Home / Metal cutting / Machining centres / Vertical machining centre Quaser MV154APC-P12 with rotary pallet changer











Vertical machining centre Quaser MV154APC-P12 with rotary pallet changer
Technical specification
| Category | Machining centres |
| Make | QUASER |
| Condition | Used |
| Location | Spain |
Description
Quaser MV154 APC/P12 vertical machining centre from 2008 with automatic pallet changer. Travels are 700 x 500 x 560 mm and the spindle reaches 12,000 rpm, making it suitable for series production with reduced idle time.
What the model offers
According to used-machine listings for the model, the Quaser MV154 APC/P is a compact, fast vertical centre with pallet changer, Fanuc 18i-MB control and a high-capacity tool changer. The pallet system lets you load one part while the machine is cutting another.
Configuration of this unit
Control: Fanuc 18i MB
Automatic pallet changer, marked APC/P
Table: 800 x 500 mm
X, Y, Z travels: 700 x 500 x 560 mm
Taper: BT-40
Spindle: 12,000 rpm
Swarf conveyor (external conveyor visible in the photos)
External hydraulic unit at the rear
Year: 2008
Weight: 7,500 kg
Typical applications
Medium and long runs of aluminium, steel or cast iron parts: automotive components, hydraulics, small moulds and machinery parts with several operations.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
What the model offers
According to used-machine listings for the model, the Quaser MV154 APC/P is a compact, fast vertical centre with pallet changer, Fanuc 18i-MB control and a high-capacity tool changer. The pallet system lets you load one part while the machine is cutting another.
Configuration of this unit
Control: Fanuc 18i MB
Automatic pallet changer, marked APC/P
Table: 800 x 500 mm
X, Y, Z travels: 700 x 500 x 560 mm
Taper: BT-40
Spindle: 12,000 rpm
Swarf conveyor (external conveyor visible in the photos)
External hydraulic unit at the rear
Year: 2008
Weight: 7,500 kg
Typical applications
Medium and long runs of aluminium, steel or cast iron parts: automotive components, hydraulics, small moulds and machinery parts with several operations.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-quaser-mv154apc-p12-with-rotary-pallet-changer
