Vertical machining centre Johnford VMC-850
Technical specification
| Category | Machining centres |
| Make | JOHNFORD |
| Condition | Used |
| Location | Spain |
Description
What it is
Johnford VMC-850 three-axis vertical machining centre for machining prismatic parts in steel, cast iron and aluminium in production and subcontract machining shops.
Key strengths
Johnford is a Taiwanese machine tool manufacturer. Listings for other VMC-850 units describe a machine with 800 x 500 x 610 mm travels and a 1,000 x 500 mm table, figures that match our data sheet. Fanuc is a very widely used control, which makes maintenance and programming easier.
Configuration of this unit
Model: VMC-850
Year: 2002 (per data sheet)
Control: Fanuc 0iMD
Table: 1,000 x 500 mm
X, Y, Z travels: 800 x 500 x 610 mm
Taper: BT-40
Spindle speed: 60 - 8,000 rpm
Through-tool coolant: yes
Tool changer: random
Swarf conveyor: auger type
Overall dimensions: 2,350 x 2,200 x 2,698 mm; weight: 5,500 kg
Typical applications
Machinery parts, tooling, simple moulds, brackets, flanges and plates requiring milling, drilling and tapping, in short or medium batches.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Johnford VMC-850 three-axis vertical machining centre for machining prismatic parts in steel, cast iron and aluminium in production and subcontract machining shops.
Key strengths
Johnford is a Taiwanese machine tool manufacturer. Listings for other VMC-850 units describe a machine with 800 x 500 x 610 mm travels and a 1,000 x 500 mm table, figures that match our data sheet. Fanuc is a very widely used control, which makes maintenance and programming easier.
Configuration of this unit
Model: VMC-850
Year: 2002 (per data sheet)
Control: Fanuc 0iMD
Table: 1,000 x 500 mm
X, Y, Z travels: 800 x 500 x 610 mm
Taper: BT-40
Spindle speed: 60 - 8,000 rpm
Through-tool coolant: yes
Tool changer: random
Swarf conveyor: auger type
Overall dimensions: 2,350 x 2,200 x 2,698 mm; weight: 5,500 kg
Typical applications
Machinery parts, tooling, simple moulds, brackets, flanges and plates requiring milling, drilling and tapping, in short or medium batches.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-johnford-vmc-850
