







Vertical machining centre Johnford VMC-1300
Technical specification
| Category | Machining centres |
| Make | JOHNFORD |
| Condition | Used |
| Location | Spain |
Description
Johnford VMC-1300 vertical machining centre
The Johnford VMC-1300, marked ‘Super Vertical’ on the frame, is a long-travel machining centre with a 1,500 x 750 mm table and 1,300 mm in X, suitable for bulky parts and large tooling.
Key strengths
Johnford is a Taiwanese manufacturer of machining centres. The Fanuc control on this unit is a 21i series model, widely used in Spanish workshops, which makes programming and maintenance easier.
Configuration of this unit
Fanuc Series 21i-MB control
1,500 x 750 mm table; travels X 1,300, Y 778, Z 800 mm
Spindle up to 8,000 rpm according to our data sheet
Disc-type tool changer, with tools fitted
Portable electronic handwheel and beacon light
Flexible coolant hoses on the spindle head
Year 2005; dimensions 3,700 x 3,900 x 2,880 mm; weight 13,500 kg
Typical applications
Machining of large, heavy parts: frames, medium-sized moulds, machinery components and tooling in steel, cast iron or aluminium.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Johnford VMC-1300, marked ‘Super Vertical’ on the frame, is a long-travel machining centre with a 1,500 x 750 mm table and 1,300 mm in X, suitable for bulky parts and large tooling.
Key strengths
Johnford is a Taiwanese manufacturer of machining centres. The Fanuc control on this unit is a 21i series model, widely used in Spanish workshops, which makes programming and maintenance easier.
Configuration of this unit
Fanuc Series 21i-MB control
1,500 x 750 mm table; travels X 1,300, Y 778, Z 800 mm
Spindle up to 8,000 rpm according to our data sheet
Disc-type tool changer, with tools fitted
Portable electronic handwheel and beacon light
Flexible coolant hoses on the spindle head
Year 2005; dimensions 3,700 x 3,900 x 2,880 mm; weight 13,500 kg
Typical applications
Machining of large, heavy parts: frames, medium-sized moulds, machinery components and tooling in steel, cast iron or aluminium.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-johnford-vmc-1300
