






Vertical machining centre Gentiger GT-105V
Technical specification
| Category | Machining centres |
| Make | GENTIGER |
| Condition | Used |
| Location | Spain |
Description
High-speed vertical machining centre
The Gentiger GT-105V is a 3-axis vertical machining centre made in Taiwan, suited to small and medium-sized workpieces in moulds, dies, precision parts and subcontracting.
Key strengths of the model
According to the published information on the model, the GT-105V combines a rigid structure with a high-speed spindle, a configuration designed for mould finishing and fast machining of aluminium and steels. Its 16,000 rpm spindle with taper 40 allows small-diameter tools to be used at high cutting speeds. The Siemens Sinumerik 840D control offers ISO programming and Siemens' own cycles, with good capacity for long CAM-generated programs.
Configuration of this unit
Model: GT-105V, year 2005
Control: Siemens 840D (Sinumerik faceplate visible in the photo)
Table: 1,100 x 550 mm
X, Y, Z travels: 1,000 x 550 x 500 mm
Taper: 40
Spindle: 16,000 rpm
Swarf conveyor
Typical applications
Electrodes and mould inserts, small cavities, aluminium parts, plates and flanges, prototypes and short runs in general machining workshops and mould makers.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Gentiger GT-105V is a 3-axis vertical machining centre made in Taiwan, suited to small and medium-sized workpieces in moulds, dies, precision parts and subcontracting.
Key strengths of the model
According to the published information on the model, the GT-105V combines a rigid structure with a high-speed spindle, a configuration designed for mould finishing and fast machining of aluminium and steels. Its 16,000 rpm spindle with taper 40 allows small-diameter tools to be used at high cutting speeds. The Siemens Sinumerik 840D control offers ISO programming and Siemens' own cycles, with good capacity for long CAM-generated programs.
Configuration of this unit
Model: GT-105V, year 2005
Control: Siemens 840D (Sinumerik faceplate visible in the photo)
Table: 1,100 x 550 mm
X, Y, Z travels: 1,000 x 550 x 500 mm
Taper: 40
Spindle: 16,000 rpm
Swarf conveyor
Typical applications
Electrodes and mould inserts, small cavities, aluminium parts, plates and flanges, prototypes and short runs in general machining workshops and mould makers.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-gentiger-gt-105v
