






Vertical machining centre Cincinnati VMC500 A2100
Technical specification
| Category | Machining centres |
| Make | CINCINNATI |
| Condition | Used |
| Location | Spain |
Description
Cincinnati VMC 500 vertical machining centre
The Cincinnati VMC 500 is a vertical machining centre with 510 mm travels on all three axes and a 700 x 520 mm table, for small and medium-sized parts.
Strengths
Cincinnati is a long-established American machine tool manufacturer. The Acramatic A2100 control listed in our data sheet is the brand's own, and the console on this unit is labelled Cincinnati.
Configuration of this unit
Cincinnati VMC-500 marking on the front
Acramatic A2100 control according to data sheet; Cincinnati console
700 x 520 mm table; 510 x 510 x 510 mm travels
ISO 40 DIN 69871 taper; 8,000 rpm spindle
Umbrella-type changer; no through-tool coolant
Portable electronic handwheel
Overall dimensions 2,200 x 2,500 x 2,400 mm
Typical applications
Machining of small and medium-sized machinery parts, tooling and components in short or medium runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Cincinnati VMC 500 is a vertical machining centre with 510 mm travels on all three axes and a 700 x 520 mm table, for small and medium-sized parts.
Strengths
Cincinnati is a long-established American machine tool manufacturer. The Acramatic A2100 control listed in our data sheet is the brand's own, and the console on this unit is labelled Cincinnati.
Configuration of this unit
Cincinnati VMC-500 marking on the front
Acramatic A2100 control according to data sheet; Cincinnati console
700 x 520 mm table; 510 x 510 x 510 mm travels
ISO 40 DIN 69871 taper; 8,000 rpm spindle
Umbrella-type changer; no through-tool coolant
Portable electronic handwheel
Overall dimensions 2,200 x 2,500 x 2,400 mm
Typical applications
Machining of small and medium-sized machinery parts, tooling and components in short or medium runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-machining-centre-cincinnati-vmc500-a2100
