





Vertical bandsaw Samur S-400
Technical specification
| Category | Sawing, Filing and Cutting-off |
| Make | SAMUR |
| Condition | Used |
| Location | Spain |
Description
Used Samur S-400 vertical bandsaw
Samur vertical endless bandsaw, model S-400 according to the machine plate. It is used to cut contours and marked-out shapes in sheet metal, sections and workshop parts, following the scribed line with the work resting on the table.
Key strengths
The plate on this unit carries a table of band speeds (in m/min) combining pulleys and ratios, with values between 12 and 448 m/min. This range lets you match the cutting speed to the material and thickness.
Configuration of this unit
Make and model (plate): Samur S-400, endless bandsaw
Large worktable with blade guide and height-adjustable blade guard
Band wheel with side cover
Speed selector and start control on the front of the column
Band speed table on the plate: 12 to 448 m/min
Automatic feed: no (data sheet)
Typical applications
Cutting contours and shapes in sheet and plate, trimming workshop parts, making templates, and maintenance and tooling work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Samur vertical endless bandsaw, model S-400 according to the machine plate. It is used to cut contours and marked-out shapes in sheet metal, sections and workshop parts, following the scribed line with the work resting on the table.
Key strengths
The plate on this unit carries a table of band speeds (in m/min) combining pulleys and ratios, with values between 12 and 448 m/min. This range lets you match the cutting speed to the material and thickness.
Configuration of this unit
Make and model (plate): Samur S-400, endless bandsaw
Large worktable with blade guide and height-adjustable blade guard
Band wheel with side cover
Speed selector and start control on the front of the column
Band speed table on the plate: 12 to 448 m/min
Automatic feed: no (data sheet)
Typical applications
Cutting contours and shapes in sheet and plate, trimming workshop parts, making templates, and maintenance and tooling work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/vertical-bandsaw-samur-s-400
