




Vertical bandsaw Samur N46
Technical specification
| Category | Sawing, Filing and Cutting-off |
| Make | SAMUR |
| Condition | Used |
| Location | Spain |
Description
Band saw vertical Samur
Vertical band saw with horizontal table, N46 reference according to our tab, to be confirmed, and Samur mark according to the speed plate. It is used for contour and length cuts in machining, utility and maintenance workshops.
Configuration of this unit
Mark: Samur (partial sign on the speed plate)
N46 reference according to record, unconfirmed; the speed plate indicates types S-300, S-300 A and S-300 B
Type: Vertical band saw, without automatic power supply (tab)
Square table with leaf entry slot and adjustable leaf guide with high wheel
Electric maneuver box on left side
Plate with four-position speed table
Auxiliary support on the left side
Typical applications
Frame cuts, cuts and cuts to length of material in maintenance and utility workshop.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Vertical band saw with horizontal table, N46 reference according to our tab, to be confirmed, and Samur mark according to the speed plate. It is used for contour and length cuts in machining, utility and maintenance workshops.
Configuration of this unit
Mark: Samur (partial sign on the speed plate)
N46 reference according to record, unconfirmed; the speed plate indicates types S-300, S-300 A and S-300 B
Type: Vertical band saw, without automatic power supply (tab)
Square table with leaf entry slot and adjustable leaf guide with high wheel
Electric maneuver box on left side
Plate with four-position speed table
Auxiliary support on the left side
Typical applications
Frame cuts, cuts and cuts to length of material in maintenance and utility workshop.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/sierra-cinta-samur-n46
