





USED HARRISON MODEL M300
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Condition | Used |
| Location | United Kingdom |
Description
Centres Height 167mm
Admits between 635mm
Swing Over bed 330mm
Over cross slide 210mm
In gap : diameter 480mm In gap : length 115mm
Spindle Bored to pass 38mm
Nose No. 4 DI Camlock
Morse taper in nose No. 5
Morse taper in bush No. 3
Speeds Number 12 Progression ratio 1.46 Range 40-2500rpm
Leadscrew Diameter 28mm Threads Metric pitches (45) from 0.2 – 14mm pitch English pitches (52) from 2 to 56 tpi Module pitches (18) from 0.3 – 3.5 MOD Diametral pitches (18) from 8 – 56 DP Feeds Longitudinal : Metric (21) from .03 to 2mm/rev Longitudinal : English (21) from .001 – .080 in/rev Cross feeds half longitudinal values Cross Slide Width 140mm Travel 190mm Top Slide Width 82mm Travel 92mm Tool Max. section 16 x 20mm Tailstock Quill diameter 42mm Travel 110mm Morse taper No. 3
Admits between 635mm
Swing Over bed 330mm
Over cross slide 210mm
In gap : diameter 480mm In gap : length 115mm
Spindle Bored to pass 38mm
Nose No. 4 DI Camlock
Morse taper in nose No. 5
Morse taper in bush No. 3
Speeds Number 12 Progression ratio 1.46 Range 40-2500rpm
Leadscrew Diameter 28mm Threads Metric pitches (45) from 0.2 – 14mm pitch English pitches (52) from 2 to 56 tpi Module pitches (18) from 0.3 – 3.5 MOD Diametral pitches (18) from 8 – 56 DP Feeds Longitudinal : Metric (21) from .03 to 2mm/rev Longitudinal : English (21) from .001 – .080 in/rev Cross feeds half longitudinal values Cross Slide Width 140mm Travel 190mm Top Slide Width 82mm Travel 92mm Tool Max. section 16 x 20mm Tailstock Quill diameter 42mm Travel 110mm Morse taper No. 3
Imported from the Wilson Machinery International Ltd stock feed (https://wilsonmachinery.co.uk/wp-json/wc/store/v1/products). Source listing: https://wilsonmachinery.co.uk/product/used-harrison-model-m300/
