




Turret milling machine Kondia mod. FV1
Technical specification
| Category | Milling machines |
| Make | KONDIA |
| Condition | Used |
| Location | Spain |
Description
What is it?
The Kondia FV-1 Powermill is a milling machine turret with vertical head of the Spanish brand Kondia. Serve for milling, drilling and skipping small and medium pieces in workshop. (Z9Z.)
Strengths
The head of our unit carries two ranges of speeds, according to its chart of approximate revolutions.
Configuration of this unit
head plate: Kondia, type FV-1
Rótulo "Powermill Kondia" en el head
Approximate speeds: low range 60-500 rpm and high 500-4.250 rpm (head sign)
X, Y, Z: 762 x 382 x 415 mm (our tab)
Table: 1.070 x 230 mm with T-slots
"Anayak 'heading on the front of the column, other than the head mark
Typical applications
Milling of plans and squadrons, drilling, slate and machining of utility and spare parts in machining and maintenance workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Kondia FV-1 Powermill is a milling machine turret with vertical head of the Spanish brand Kondia. Serve for milling, drilling and skipping small and medium pieces in workshop. (Z9Z.)
Strengths
The head of our unit carries two ranges of speeds, according to its chart of approximate revolutions.
Configuration of this unit
head plate: Kondia, type FV-1
Rótulo "Powermill Kondia" en el head
Approximate speeds: low range 60-500 rpm and high 500-4.250 rpm (head sign)
X, Y, Z: 762 x 382 x 415 mm (our tab)
Table: 1.070 x 230 mm with T-slots
"Anayak 'heading on the front of the column, other than the head mark
Typical applications
Milling of plans and squadrons, drilling, slate and machining of utility and spare parts in machining and maintenance workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-torreta-kondia-mod-fv1-1
