






Turret milling machine Kondia KP-90
Technical specification
| Category | Milling machines |
| Make | KONDIA |
| Condition | Used |
| Location | Spain |
Description
Milling machine of turret Kondia KP-90 of occasion
The Kondia KP-90 is a milling machine turret with vertical head, designed to machine loose parts, utility, simple mold and short series in general machining workshops. The head of this unit bears the sign "Powermill Kondia" (photo).
In the turret milling machines the vertical head can be oriented, making it easier to mash planes, drill and mandrinate with a single clamp. We have not confirmed the spindle cone in this unit, so we do not indicate it.
Configuration of this unit
Model: Kondia KP-90, turret type
Surfaces: X 600 mm, Y 350 mm, Z 390 mm
Table: 1.200 x 300 mm
head speed: 60 to 4.000 rpm (head is marked with two ranges, 60-500 and 500-4.000 rpm)
Year: 2002 (according to our tab)
Three-axes Fagor, visible in the photos
Typical applications
Milling of plans and squadrons, drilling and mandrination of parts of general mechanics, manufacture of utility and repair or maintenance in registration and subcontracting workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Kondia KP-90 is a milling machine turret with vertical head, designed to machine loose parts, utility, simple mold and short series in general machining workshops. The head of this unit bears the sign "Powermill Kondia" (photo).
In the turret milling machines the vertical head can be oriented, making it easier to mash planes, drill and mandrinate with a single clamp. We have not confirmed the spindle cone in this unit, so we do not indicate it.
Configuration of this unit
Model: Kondia KP-90, turret type
Surfaces: X 600 mm, Y 350 mm, Z 390 mm
Table: 1.200 x 300 mm
head speed: 60 to 4.000 rpm (head is marked with two ranges, 60-500 and 500-4.000 rpm)
Year: 2002 (according to our tab)
Three-axes Fagor, visible in the photos
Typical applications
Milling of plans and squadrons, drilling and mandrination of parts of general mechanics, manufacture of utility and repair or maintenance in registration and subcontracting workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-de-torreta-kondia-kp-91
