



Turret milling machine Kondia KP-90
Technical specification
| Category | Milling machines |
| Make | KONDIA |
| Condition | Used |
| Location | Spain |
Description
Milling machine of turret Kondia KP-90 of occasion
milling machine made of Kondia turret, made of Elgoibar, for workshop machining, utility and maintenance.
Model strengths
According to ads from other KP-90 units, the spindle carries ISO 40 cone and reaches 4.000 rpm. Our tab indicates ISO 30, so that data must be confirmed in the machine.
Configuration of this unit
Model: KP-90, turret type; Rated Powermill Kondia in head
Surfaces: 600 mm (X), 350 mm (Y), 390 mm (Z)
Table: 1.200 x 300 mm
Cone: ISO 30 (according to sheet, to be confirmed)
Main engine power: 2 CV
External measurements: 1.800 x 1.700 x 2.300 mm
Fagor two-axes, X and Y height display
High and low speed selector in the head
Traction box with pushers and emergency stop
Typical applications
Milling of plans, slots and squads, drilling and machining of unit parts or short series.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
milling machine made of Kondia turret, made of Elgoibar, for workshop machining, utility and maintenance.
Model strengths
According to ads from other KP-90 units, the spindle carries ISO 40 cone and reaches 4.000 rpm. Our tab indicates ISO 30, so that data must be confirmed in the machine.
Configuration of this unit
Model: KP-90, turret type; Rated Powermill Kondia in head
Surfaces: 600 mm (X), 350 mm (Y), 390 mm (Z)
Table: 1.200 x 300 mm
Cone: ISO 30 (according to sheet, to be confirmed)
Main engine power: 2 CV
External measurements: 1.800 x 1.700 x 2.300 mm
Fagor two-axes, X and Y height display
High and low speed selector in the head
Traction box with pushers and emergency stop
Typical applications
Milling of plans, slots and squads, drilling and machining of unit parts or short series.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-torreta-kondia-kp-90
