
























Tracto Technik - TUBOMAT
Technical specification
| Category | Bend- straight- reducing of pipes bars profiles |
| Make | Tracto Technik |
| Model | TUBOMAT |
| Year | 1996 |
| Condition | Used |
| Location | Babberich, Netherlands |
| Max.Tube Ø | 42 mm |
| Min. Tube Ø | 6 mm |
| Max. Wall thickness | 3 mm |
| Max. Bending radius | 5 mm |
| Min. Bending radius | 180 mm |
| Max. bending length | 2000 mm |
| Deburring attachment | Yes |
| Sawing attachment | Yes |
| Flair attachment | Yes |
Description
- Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display
- Hydraulicbendingdriveoperatedbyhandlevervalve
- Hydraulic bending drive, operated by hand lever valve
- Follower-type pressure die (sliding guide)
- Hydraulic mandrel retraction
- Pipe circular saw with coolant lubrication and automatic feed
- Pipe deburring unit for internal and external deburring
- Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device
- Machine mobile and flexible to use
- Hydraulicbendingdriveoperatedbyhandlevervalve
- Hydraulic bending drive, operated by hand lever valve
- Follower-type pressure die (sliding guide)
- Hydraulic mandrel retraction
- Pipe circular saw with coolant lubrication and automatic feed
- Pipe deburring unit for internal and external deburring
- Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device
- Machine mobile and flexible to use
Imported from the Mach4Metal BV stock feed (https://mach4metal.com/exports/eamtm-stock-feed.xml). Source listing: https://mach4metal.com/en/bending-machines/tube/tracto-technik-tubomat-2
