Toshiba Horizontal Machining Centre Model NX76B.
Technical specification
| Category | Machining centres |
| Make | TOSHIBA |
| Condition | Used |
| Location | United Kingdom |
| X | 34" 863.6 mm |
| Y | 30" 762 mm |
| Z | 30" 762 mm |
| Power | 50 hp 37.3 kW |
| RPM | 8,000 RPM 8,000 RPM |
| # ATC | 60 60 |
| Taper | CAT 50 CAT 50 |
| Pallet-W | 29.5" 749.3 mm |
| Pallet-L | 24.8" 629.92 mm |
| X | 34" |
| Y | 30" |
| Z | 30" |
| Power | 50 hp |
| RPM | 8,000 RPM |
| # ATC | 60 |
| Taper | CAT 50 |
| Pallet-W | 29.5" |
| Pallet-L | 24.8" |
Description
Serial Number 213057, Four Axes Machining Centre, Spindle 8,000RPM, 120 Station ATCTwin Pallet 630mm, BT50, Full fourth axis, High pressure, through spindle coolant, Orbital boring capability on the spindle. TOSNUC 888.2 control. New 2003 (August).
Imported from the Bowland Trading Ltd stock feed (https://www.bowlandtrading.com/sitemap.xml). Source listing: https://www.bowlandtrading.com/equipment/7784830-toshiba-nx-76b-horizontal-machining-centers
