




Takumi VC1000 vertical machining centre
Technical specification
| Category | Machining centres |
| Make | TAKUMI & HURCO |
| Condition | Used |
| Location | Spain |
Description
The Takumi VC1000 is a 3-axis vertical machining centre of the VC series, with a C-frame bed and cross-type table, designed for part and tooling production with an excellent price-performance ratio. Its travels are 1,067 × 610 × 610 mm and the 1,270 × 610 mm table takes 1,000 kg.
As standard it is fitted with an in-line spindle at 15,000 rpm with an SK40 BigPlus taper, 10 / 14 kW and 89.4 Nm, cooled by a chiller. An optional 15,000 rpm spindle of up to 89.4 Nm is available. The double-arm magazine has 40 positions and rapid traverse rates reach 36 / 36 / 24 m/min, with preloaded linear ball guideways on all three axes.
The Meehanite cast-iron structure, hand-scraped assembly surfaces and preloaded ball screws ensure accuracy and thermal stability. The European equipment includes a Heidenhain TNC7 basic control, full enclosure, programmable air blast, an oil skimmer and a swarf conveyor; options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, measuring probes and the Knoll production package.
It weighs 6,750 kg and offers wide loading access for short runs and frequent part changes. Ferrotall advises you on configuration, installation, service and support.
As standard it is fitted with an in-line spindle at 15,000 rpm with an SK40 BigPlus taper, 10 / 14 kW and 89.4 Nm, cooled by a chiller. An optional 15,000 rpm spindle of up to 89.4 Nm is available. The double-arm magazine has 40 positions and rapid traverse rates reach 36 / 36 / 24 m/min, with preloaded linear ball guideways on all three axes.
The Meehanite cast-iron structure, hand-scraped assembly surfaces and preloaded ball screws ensure accuracy and thermal stability. The European equipment includes a Heidenhain TNC7 basic control, full enclosure, programmable air blast, an oil skimmer and a swarf conveyor; options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, measuring probes and the Knoll production package.
It weighs 6,750 kg and offers wide loading access for short runs and frequent part changes. Ferrotall advises you on configuration, installation, service and support.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/takumi-vc1000-vertical-machining-centre
