



Takumi V20 vertical machining centre
Technical specification
| Category | Machining centres |
| Make | TAKUMI & HURCO |
| Condition | Used |
| Location | Spain |
Description
The Takumi V20 is a 3-axis vertical machining centre of the V series, built with box ways on all axes for heavy stock removal in steel, cast iron and alloy steels. It offers travels of 2,000 × 1,066 × 750 mm and a 2,200 × 1,025 mm table that takes up to 2,000 kg.
The standard geared spindle reaches 6,000 rpm with an SK50 taper, 24 / 38 kW and 967 Nm of torque. The double-arm tool changer handles 24 tools and rapid traverse rates reach 14 / 14 / 12 m/min.
The bed, column and saddle are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces: rigidity and damping for good finishes and longer tool life. In Europe it is supplied with a Heidenhain TNC7 basic control, spindle cooling, swarf flushing, an oil skimmer and a swarf conveyor. Options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, workpiece and tool probes and the Knoll production package.
Weighing 17,200 kg, the V20 is a robust machine for mould, tooling and machinery-part workshops that need power and stability. Ferrotall advises you on configuration, installation, service and support in Spain.
The standard geared spindle reaches 6,000 rpm with an SK50 taper, 24 / 38 kW and 967 Nm of torque. The double-arm tool changer handles 24 tools and rapid traverse rates reach 14 / 14 / 12 m/min.
The bed, column and saddle are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces: rigidity and damping for good finishes and longer tool life. In Europe it is supplied with a Heidenhain TNC7 basic control, spindle cooling, swarf flushing, an oil skimmer and a swarf conveyor. Options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, workpiece and tool probes and the Knoll production package.
Weighing 17,200 kg, the V20 is a robust machine for mould, tooling and machinery-part workshops that need power and stability. Ferrotall advises you on configuration, installation, service and support in Spain.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/takumi-v20-vertical-machining-centre
