



Takumi V12 vertical machining centre
Technical specification
| Category | Machining centres |
| Make | TAKUMI & HURCO |
| Condition | Used |
| Location | Spain |
Description
The Takumi V12 is a 3-axis vertical machining centre of the V series, built with box ways on all axes for heavy stock removal in steel, cast iron and alloy steels. It offers travels of 1,200 × 660 × 610 mm and a 1,250 × 650 mm table that takes up to 1,200 kg.
The standard belt-driven spindle reaches 12,000 rpm with an SK40 / BT40 taper, 10 / 14 kW and 89 Nm of torque. An optional 8,000 rpm spindle of up to 503 Nm is available. The double-arm tool changer handles 24 tools and rapid traverse rates reach 24 / 24 / 20 m/min.
The bed, column and saddle are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces: rigidity and damping for good finishes and longer tool life. In Europe it is supplied with a Heidenhain TNC7 basic control, spindle cooling, swarf flushing, an oil skimmer and a swarf conveyor. Options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, workpiece and tool probes and the Knoll production package.
Weighing 8,100 kg, the V12 is a robust machine for mould, tooling and machinery-part workshops that need power and stability. Ferrotall advises you on configuration, installation, service and support in Spain.
The standard belt-driven spindle reaches 12,000 rpm with an SK40 / BT40 taper, 10 / 14 kW and 89 Nm of torque. An optional 8,000 rpm spindle of up to 503 Nm is available. The double-arm tool changer handles 24 tools and rapid traverse rates reach 24 / 24 / 20 m/min.
The bed, column and saddle are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces: rigidity and damping for good finishes and longer tool life. In Europe it is supplied with a Heidenhain TNC7 basic control, spindle cooling, swarf flushing, an oil skimmer and a swarf conveyor. Options include through-spindle coolant at 30 bar, a 4th/5th-axis rotary table, workpiece and tool probes and the Knoll production package.
Weighing 8,100 kg, the V12 is a robust machine for mould, tooling and machinery-part workshops that need power and stability. Ferrotall advises you on configuration, installation, service and support in Spain.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/takumi-v12-vertical-machining-centre
