





Takumi H10 gantry machining centre
Technical specification
| Category | Machining centres |
| Make | TAKUMI & HURCO |
| Condition | Used |
| Location | Spain |
Description
The Takumi H10 is a 3-axis gantry (double-column) machining centre of the H series, designed for high-precision, high-speed machining of moulds, dies and precision parts. It offers travels of 1,020 × 700 × 500 mm, 1,080 mm between columns and a 1,050 × 700 mm table for 800 kg.
The standard spindle is an in-line type at 15,000 rpm with an SK40 BigPlus taper (10 / 14 kW, 89.4 Nm). Optional spindles from 15,000 to 36,000 rpm are available, with up to 139.6 Nm of torque, including HSK63-A motor spindles for high-speed finishing. The double-arm magazine has 30 positions and rapid traverse rates reach 30 / 30 / 30 m/min.
The bed, columns and crossrail are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces and oversized linear roller guideways. As standard it includes a Heidenhain TNC7 control, absolute linear scales on all axes, thermal spindle compensation with sensors, through-spindle coolant at 30 bar and a swarf conveyor. Options include a 4th/5th-axis rotary table, measuring probes, ball screw cooling, through-spindle coolant at 70 bar and automatic doors.
With 9,100 kg of cast iron, the H10 is a stable base for demanding finishing work. Ferrotall advises you on configuration, installation, service and support.
The standard spindle is an in-line type at 15,000 rpm with an SK40 BigPlus taper (10 / 14 kW, 89.4 Nm). Optional spindles from 15,000 to 36,000 rpm are available, with up to 139.6 Nm of torque, including HSK63-A motor spindles for high-speed finishing. The double-arm magazine has 30 positions and rapid traverse rates reach 30 / 30 / 30 m/min.
The bed, columns and crossrail are made of heat-treated Meehanite cast iron, with hand-scraped bearing surfaces and oversized linear roller guideways. As standard it includes a Heidenhain TNC7 control, absolute linear scales on all axes, thermal spindle compensation with sensors, through-spindle coolant at 30 bar and a swarf conveyor. Options include a 4th/5th-axis rotary table, measuring probes, ball screw cooling, through-spindle coolant at 70 bar and automatic doors.
With 9,100 kg of cast iron, the H10 is a stable base for demanding finishing work. Ferrotall advises you on configuration, installation, service and support.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/takumi-h10-gantry-machining-centre
