






Slotting machine Urpe MN 200 G
Technical specification
| Category | Shaping, Slotting and Broaching |
| Make | URPE |
| Condition | Used |
| Location | Spain |
Description
Slotting machine Urpe MN 200 G
The Urpe MN 200 G is a conventional slotting machine with alternative vertical movement of the tool, used to open shawls, inner slots and profiles in mechanical parts. In the photos you can see the sign "MN 200 G" at the base.
According to the Urpe feature sheet included in our photos, the MN-200 G model gives 40 to 75 hits per minute on three steps (40, 55 and 75), with a table of 666 x 280 mm and head tilted on both sides. It's data from the model sheet.
Configuration of this unit
Model: Urpe MN 200 G, conventional
Table measurements and tours according to our sheet: 666 x 280 mm and 530 x 250 mm (the sheet of the model gives 666 x 280 mm as a table surface and 530 x 250 mm as a table course)
No chuck divider (sheet)
Year: 2002 (according to our tab)
Gear and stop press in control box, and transparent protection with catch notice
Typical applications
Chaveteros in cubes and pulleys, inner grooves, entresses and prismatic profiles in loose parts, maintenance and utility.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Urpe MN 200 G is a conventional slotting machine with alternative vertical movement of the tool, used to open shawls, inner slots and profiles in mechanical parts. In the photos you can see the sign "MN 200 G" at the base.
According to the Urpe feature sheet included in our photos, the MN-200 G model gives 40 to 75 hits per minute on three steps (40, 55 and 75), with a table of 666 x 280 mm and head tilted on both sides. It's data from the model sheet.
Configuration of this unit
Model: Urpe MN 200 G, conventional
Table measurements and tours according to our sheet: 666 x 280 mm and 530 x 250 mm (the sheet of the model gives 666 x 280 mm as a table surface and 530 x 250 mm as a table course)
No chuck divider (sheet)
Year: 2002 (according to our tab)
Gear and stop press in control box, and transparent protection with catch notice
Typical applications
Chaveteros in cubes and pulleys, inner grooves, entresses and prismatic profiles in loose parts, maintenance and utility.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/mortajadora-urpe-mn-200-g
