






Saw Danobat CP 520 FHS
Technical specification
| Category | Sawing, Filing and Cutting-off |
| Make | DANOBAT |
| Condition | Used |
| Location | Spain |
Description
Danobat CP520AFHS automatic bandsaw
The Danobat CP520AFHS is an automatic bandsaw with automatic feed, built in 1998 according to our data sheet. It is designed for cutting large-section bar and billets in forging, steel service centres and heavy machining shops.
Key strengths of the CP series
According to the trade press, the Danobat CP520AF has two prismatic guide columns on linear rails and a hydraulic vice that positions the material at the cutting length. A round-bar cutting capacity of 20 ½ inches (about 520 mm) is quoted, with a 2 ⅛-inch-wide blade.
Configuration of this unit
Model: Danobat CP520AFHS (according to data sheet)
Type: bandsaw
Automatic drive and feed
Year: 1998 (according to data sheet)
Weight: 5,000 kg (according to data sheet)
Typical applications
Cutting large-diameter rounds, squares and sections in forging, steel service centres, mould making, heavy machinery and machining shops that prepare raw stock.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Danobat CP520AFHS is an automatic bandsaw with automatic feed, built in 1998 according to our data sheet. It is designed for cutting large-section bar and billets in forging, steel service centres and heavy machining shops.
Key strengths of the CP series
According to the trade press, the Danobat CP520AF has two prismatic guide columns on linear rails and a hydraulic vice that positions the material at the cutting length. A round-bar cutting capacity of 20 ½ inches (about 520 mm) is quoted, with a 2 ⅛-inch-wide blade.
Configuration of this unit
Model: Danobat CP520AFHS (according to data sheet)
Type: bandsaw
Automatic drive and feed
Year: 1998 (according to data sheet)
Weight: 5,000 kg (according to data sheet)
Typical applications
Cutting large-diameter rounds, squares and sections in forging, steel service centres, mould making, heavy machinery and machining shops that prepare raw stock.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/saw-danobat-cp-520-fhs
