











Roder machine plan (DLM-450, STAEHLI)
Technical specification
| Category | Grinding, Honing and Polishing |
| Condition | Used |
| Location | Switzerland |
| Type | DLM-450 |
Description
Origin of manufacture CH
400V voltage
Dimensions 1200 x 1650 x 2050 mm
Net machine weight 1900 kg
TECHNICAL CHARACTERISTICS
Machine:
Rotation speed of 0-110 min-1 trays
Max drive power of 2 kW trays
Max load of top plate 20 daN
Diameter of trays Ø 450 mm
Internal drive rotation speed 0-115 min-1
Max inside drive power 0,5 kW
Tray drive engines (continuous engine):
DC engine type
Rebar voltage Ua 260 V
Field voltage Ue 340 V
Rotation speed 3110 min-1
Power 2 kW
External ventilation 220V, 50/60 Hz
Inside drive motor:
Engine type middle control, without bumps
Rebar voltage Ua 260 V
Field voltage Ue 340 V
Rotation speed 3110 min-1
Power 0,5 kW
Separate ventilation 220V, 50/60 Hz
Vertical displacement engine:
Step by step engine type
Not per second 50
Couple 1100 Nm
Toothed crown adjustment:
Engine type AC brake
2 positions
Voltage 380V / 50 Hz
Rotation speed 700-1400 min-1
Power 0,25/0,37 kW
24V DC brake
Brake torque 16 Nm
Power converters:
Input voltage 380V / 50 Hz
Induced voltage 270 V
Field voltage 340 V
Endless screw gear ratio (inner drive)
Ratio i = 1: 30
Endless screw gear ratio (lower system)
Ratio i = 1: 15,5
Endless screw gear ratio (upper system)
Ratio i = 1: 15,5
Operating pressure:
Air circuit 6-7 bar
Rodage liquid pump:
Connection voltage to 380V 50Hz
Rotation speed 2600 min-1
57 L/Min flow rate
IP protection 44
Monitoring and measuring device:
Measuring range 6 (±3 to ±11000 mm)
See details in directions for use Millitron
Induction sensor:
Measurement range ± 2 mm
Set-value adjustment device:
Display to 4 digits
If there is any error or omission, the technical information is given to you without obligation.
400V voltage
Dimensions 1200 x 1650 x 2050 mm
Net machine weight 1900 kg
TECHNICAL CHARACTERISTICS
Machine:
Rotation speed of 0-110 min-1 trays
Max drive power of 2 kW trays
Max load of top plate 20 daN
Diameter of trays Ø 450 mm
Internal drive rotation speed 0-115 min-1
Max inside drive power 0,5 kW
Tray drive engines (continuous engine):
DC engine type
Rebar voltage Ua 260 V
Field voltage Ue 340 V
Rotation speed 3110 min-1
Power 2 kW
External ventilation 220V, 50/60 Hz
Inside drive motor:
Engine type middle control, without bumps
Rebar voltage Ua 260 V
Field voltage Ue 340 V
Rotation speed 3110 min-1
Power 0,5 kW
Separate ventilation 220V, 50/60 Hz
Vertical displacement engine:
Step by step engine type
Not per second 50
Couple 1100 Nm
Toothed crown adjustment:
Engine type AC brake
2 positions
Voltage 380V / 50 Hz
Rotation speed 700-1400 min-1
Power 0,25/0,37 kW
24V DC brake
Brake torque 16 Nm
Power converters:
Input voltage 380V / 50 Hz
Induced voltage 270 V
Field voltage 340 V
Endless screw gear ratio (inner drive)
Ratio i = 1: 30
Endless screw gear ratio (lower system)
Ratio i = 1: 15,5
Endless screw gear ratio (upper system)
Ratio i = 1: 15,5
Operating pressure:
Air circuit 6-7 bar
Rodage liquid pump:
Connection voltage to 380V 50Hz
Rotation speed 2600 min-1
57 L/Min flow rate
IP protection 44
Monitoring and measuring device:
Measuring range 6 (±3 to ±11000 mm)
See details in directions for use Millitron
Induction sensor:
Measurement range ± 2 mm
Set-value adjustment device:
Display to 4 digits
If there is any error or omission, the technical information is given to you without obligation.
Listing text machine-translated into English from French. Make and model are as supplied by the dealer.
Imported from the Scemama SA stock feed (https://scemama.ch/wp-json/wc/store/v1/products). Source listing: https://scemama.ch/produit/machine-a-roder-plan-staehli-type-dlm-450-2/
