





Radial arm drill Soraluce TR3-100 2500 X 8000 M4042
Technical specification
| Category | Drilling |
| Make | SORALUCE |
| Condition | Used |
| Location | Spain |
Description
Radial drill Soraluce TR3-2500 with travel longitudinal 8.000 mm
The Soraluce TR3-2500 is a column and arm radial drill, designed to drill, mandrinate and thread voluminous pieces that are tied as the head moves to each working point. Our tab collects a longitudinal travel of 8.000 mm.
Strengths
According to the manufacturer's catalog for the TR3-2500 model, this series declares a drilling capacity of 80 mm in steel and 100 mm in cast, spindle with 110 mm in diameter with stroke of 450 mm, 16 speeds between 20 and 1.475 rpm and 8 advances.
Configuration of this unit
Model: TR3-2500 (feature plate), manufacturer Soraluce, Placence (Gipuzkoa)
Type: radial
travel longitudinal: 8.000 mm
Drilling capacity: 100 mm
Cone: Morse 6
Main engine power: 10 CV
Possible disassembly: in the photos of the sheet the column and the head appear mounted on its basis, while the side and table elements are stacked separately on wooden tacos; we cannot confirm that the machine is fully mounted
Typical applications
Drilling and threading of flanges, housing, plates and structures of large cast or steel, in caldería workshops, equipment and industrial maintenance.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Soraluce TR3-2500 is a column and arm radial drill, designed to drill, mandrinate and thread voluminous pieces that are tied as the head moves to each working point. Our tab collects a longitudinal travel of 8.000 mm.
Strengths
According to the manufacturer's catalog for the TR3-2500 model, this series declares a drilling capacity of 80 mm in steel and 100 mm in cast, spindle with 110 mm in diameter with stroke of 450 mm, 16 speeds between 20 and 1.475 rpm and 8 advances.
Configuration of this unit
Model: TR3-2500 (feature plate), manufacturer Soraluce, Placence (Gipuzkoa)
Type: radial
travel longitudinal: 8.000 mm
Drilling capacity: 100 mm
Cone: Morse 6
Main engine power: 10 CV
Possible disassembly: in the photos of the sheet the column and the head appear mounted on its basis, while the side and table elements are stacked separately on wooden tacos; we cannot confirm that the machine is fully mounted
Typical applications
Drilling and threading of flanges, housing, plates and structures of large cast or steel, in caldería workshops, equipment and industrial maintenance.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/taladro-bandera-soraluce-tr3-100-2500-x-8000-m4042
