





Punching press SP588/5 25 t
Technical specification
| Category | Shears |
| Make | ATOM |
| Condition | Used |
| Location | Spain |
Description
What is it?
The Atom SP588 is a mobile head (type "clicker") hydraulic thickener for cutting with blades or material thicknesses on sheet or iron, such as skin, textiles, plastic, cardboard or rubber. This unit is shown on our tab as SP 588/5 and as 25 machine t.
Strengths
According to the SP588 series distributors' ads, these presses incorporate synchronized controls with programmable cut counter and dynamic head braking, in addition to variable cut stroke. The series is offered in several forces, between 25 and 40 t according to the same ads. In this unit you can see a desk with a mechanical counter, two two two-way selectors, two potentiometers and a general sectionator with a stop.
Configuration of this unit
Atom mark, "SP588" sign in the head
Model according to our tab: SP 588/5
Force of 25 t according to the title of our tab (to be checked in plate)
Side desk with counter, selectors, rotating controls and sectionator
Visible drive pedal on the ground
Typical applications
Cutting of flat parts for footwear, Moroccan, upholstery, joints, packaging and technical material, both with crates and with contour blades.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Atom SP588 is a mobile head (type "clicker") hydraulic thickener for cutting with blades or material thicknesses on sheet or iron, such as skin, textiles, plastic, cardboard or rubber. This unit is shown on our tab as SP 588/5 and as 25 machine t.
Strengths
According to the SP588 series distributors' ads, these presses incorporate synchronized controls with programmable cut counter and dynamic head braking, in addition to variable cut stroke. The series is offered in several forces, between 25 and 40 t according to the same ads. In this unit you can see a desk with a mechanical counter, two two two-way selectors, two potentiometers and a general sectionator with a stop.
Configuration of this unit
Atom mark, "SP588" sign in the head
Model according to our tab: SP 588/5
Force of 25 t according to the title of our tab (to be checked in plate)
Side desk with counter, selectors, rotating controls and sectionator
Visible drive pedal on the ground
Typical applications
Cutting of flat parts for footwear, Moroccan, upholstery, joints, packaging and technical material, both with crates and with contour blades.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/troqueladora-sp588-5-25tn
