






Press Camp 60 t
Technical specification
| Category | Hydraulic Presses |
| Make | CAMP |
| Condition | Used |
| Location | Spain |
Description
Press Hydraulic Camp 60 TM
The Camp 60 TM is a rigid and small hydraulic frame press for work that requires high force in little space: stamping of medals, punching, straightening, pressure mounting and calibration of matrices.
According to the Camp catalogue in our photos ("presses oleohydraulics type P-R, press reduced, 60 models to 300 t"), the 60 t model has a stroke of the 150 mm piston and a space between 450 mm columns; these are data from the series catalogue, not measured in this unit.
Configuration of this unit
Model: Camp 60 TM LM-170, hydraulic
Nominal force: 60 t (according to the 60 TM designation and our tab)
Table: 480 x 260 mm
External measurements: 1.114 x 820 x 2.280 mm
Hydraulic group with electric motor, manometer and manual lever
Pressure plate on central piston
Typical applications
Spreading of small-format medals and parts, calibrated, straightened, mounting of bearings and casings, and testing of matrices in mechanical and utility workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
The Camp 60 TM is a rigid and small hydraulic frame press for work that requires high force in little space: stamping of medals, punching, straightening, pressure mounting and calibration of matrices.
According to the Camp catalogue in our photos ("presses oleohydraulics type P-R, press reduced, 60 models to 300 t"), the 60 t model has a stroke of the 150 mm piston and a space between 450 mm columns; these are data from the series catalogue, not measured in this unit.
Configuration of this unit
Model: Camp 60 TM LM-170, hydraulic
Nominal force: 60 t (according to the 60 TM designation and our tab)
Table: 480 x 260 mm
External measurements: 1.114 x 820 x 2.280 mm
Hydraulic group with electric motor, manometer and manual lever
Pressure plate on central piston
Typical applications
Spreading of small-format medals and parts, calibrated, straightened, mounting of bearings and casings, and testing of matrices in mechanical and utility workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/prensa-camp-60-tm
