



Polishing machine Letag P-10
Technical specification
| Category | Grinding, Honing and Polishing |
| Make | LETAG |
| Condition | Used |
| Location | Spain |
Description
Electropulidora Letag P-10 with abrasive bands
Electropulidora pedestal with a central engine and a axis on each side. In our photos it appears with two arms of abrasive band, one at each end of the axis, which guides it to the unbarging and finishing of metal surfaces.
According to the plate, the equipment is the work of Letag, Ormaiztegi (Gipuzkoa), and has CE marking. It has drive and stop pushers on the engine's own body and a pedestal.
Configuration of this unit
Type: P-10 (feature plate and our tab).
power: 5 CV / 3,7 kW (plate).
Speed: 2.850 rpm (plate).
voltage: 380 V, 50 Hz; 9,3 A; IP 44 (plate).
Two arms of abrasive band, one on each side of the axis (photos).
Pulsadores green and red on the engine body (photos).
Typical applications
Desbarbado and sanding of parts of sheet, profiles and cast; welding cord finish; surface preparation in caldería and utilage workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Electropulidora pedestal with a central engine and a axis on each side. In our photos it appears with two arms of abrasive band, one at each end of the axis, which guides it to the unbarging and finishing of metal surfaces.
According to the plate, the equipment is the work of Letag, Ormaiztegi (Gipuzkoa), and has CE marking. It has drive and stop pushers on the engine's own body and a pedestal.
Configuration of this unit
Type: P-10 (feature plate and our tab).
power: 5 CV / 3,7 kW (plate).
Speed: 2.850 rpm (plate).
voltage: 380 V, 50 Hz; 9,3 A; IP 44 (plate).
Two arms of abrasive band, one on each side of the axis (photos).
Pulsadores green and red on the engine body (photos).
Typical applications
Desbarbado and sanding of parts of sheet, profiles and cast; welding cord finish; surface preparation in caldería and utilage workshops.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/pulidora-letag-p-10
