






Pinacho S90-180 lathe
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Pinacho S-90/180 centre lathe
Compact conventional centre lathe from the Spanish manufacturer Pinacho, suited to maintenance shops, prototyping, vocational training and the manufacture of small parts: shafts, bushings, special fasteners, pins and spare parts.
Key strengths
The Pinacho S-90 series is a workshop lathe that is very widespread in Spain, with a threading gearbox for metric, Whitworth, module and diametral pitch threads, according to the machine's own chart. This unit has a digital readout, chuck guard and carriage guard, which makes for precise and safe work.
Configuration of this unit
Model: Pinacho S-90/180 (labelled on the headstock, photos 1 and 3)
Distance between centres: 750 mm
Swing over bed: 360 mm; in gap: 520 mm; over cross slide: 205 mm
Spindle bore: 52 mm
Bed width: 250 mm
Maximum speed: 2,000 rpm
Main motor power: 3.4 kW
Digital readout (photos 1, 3 and 6)
3-jaw chuck and chuck guard (photos 1 and 3)
Quick-change toolpost turret and coolant (photos 4 and 5)
Overall dimensions: 1,900 x 950 x 1,485 mm
Weight: 880 kg
Typical applications
Turning and threading of small parts, repairs, one-off parts and training in vocational schools.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Compact conventional centre lathe from the Spanish manufacturer Pinacho, suited to maintenance shops, prototyping, vocational training and the manufacture of small parts: shafts, bushings, special fasteners, pins and spare parts.
Key strengths
The Pinacho S-90 series is a workshop lathe that is very widespread in Spain, with a threading gearbox for metric, Whitworth, module and diametral pitch threads, according to the machine's own chart. This unit has a digital readout, chuck guard and carriage guard, which makes for precise and safe work.
Configuration of this unit
Model: Pinacho S-90/180 (labelled on the headstock, photos 1 and 3)
Distance between centres: 750 mm
Swing over bed: 360 mm; in gap: 520 mm; over cross slide: 205 mm
Spindle bore: 52 mm
Bed width: 250 mm
Maximum speed: 2,000 rpm
Main motor power: 3.4 kW
Digital readout (photos 1, 3 and 6)
3-jaw chuck and chuck guard (photos 1 and 3)
Quick-change toolpost turret and coolant (photos 4 and 5)
Overall dimensions: 1,900 x 950 x 1,485 mm
Weight: 880 kg
Typical applications
Turning and threading of small parts, repairs, one-off parts and training in vocational schools.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/pinacho-s90-180-lathe
