
Pinacho L-1 1225X1500 lathe
Technical specification
| Category | Turning (Automatics, Borers and Lathes) |
| Make | PINACHO |
| Condition | Used |
| Location | Spain |
Description
Pinacho L-1/225 centre lathe
Conventional centre lathe for machining shafts, bushings, flanges, pulleys and medium-sized parts of revolution. With a 450 mm swing over bed and a gap for short parts of up to 650 mm, it is a very common format in general machining and maintenance shops.
Key strengths
Pinacho is a Spanish lathe manufacturer and the L-1 series is one of its ranges of conventional centre lathes. This unit has a 300 mm wide bed and a 52 mm spindle bore, which lets bar of that diameter pass through the headstock.
Configuration of this unit
Model: L-1/225 (labelled on the headstock, photo 1)
Distance between centres: 1,150 mm
Swing over bed: 450 mm
Swing over gap: 650 mm
Swing over cross slide: 260 mm
Spindle bore diameter: 52 mm
Bed width: 300 mm
Fold-down chuck guard (photo 1)
Typical applications
Repair and manufacture of shafts, threads, bushings and flanges, one-off parts and short runs in industrial and agricultural maintenance workshops.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Conventional centre lathe for machining shafts, bushings, flanges, pulleys and medium-sized parts of revolution. With a 450 mm swing over bed and a gap for short parts of up to 650 mm, it is a very common format in general machining and maintenance shops.
Key strengths
Pinacho is a Spanish lathe manufacturer and the L-1 series is one of its ranges of conventional centre lathes. This unit has a 300 mm wide bed and a 52 mm spindle bore, which lets bar of that diameter pass through the headstock.
Configuration of this unit
Model: L-1/225 (labelled on the headstock, photo 1)
Distance between centres: 1,150 mm
Swing over bed: 450 mm
Swing over gap: 650 mm
Swing over cross slide: 260 mm
Spindle bore diameter: 52 mm
Bed width: 300 mm
Fold-down chuck guard (photo 1)
Typical applications
Repair and manufacture of shafts, threads, bushings and flanges, one-off parts and short runs in industrial and agricultural maintenance workshops.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/pinacho-l-1-1225x1500-lathe
