




Pillar drill Erlo TCA 40
Technical specification
| Category | Drilling |
| Make | ERLO |
| Condition | Used |
| Location | Spain |
Description
Drill column Erlo TCA-40
drill column of the Erlo TCA series, with head of speed and advance selectors, tentate column to raise the table and cast base with T slots It is used for drilling, drilling and related operations in medium-sized workshop parts, with Morse 4. cone tools
Model points
The head plate identifies the TCA-40. model Incorporates vertical work rest blade depth, advance selector and manual advance with three-arm steering wheel, in addition to a table with spindle. speeds (Z9Z.)
Configuration of this unit
Brand and model: Erlo TCA-40 (head plate)
Type: column
Drilling capacity: 40 mm
spindle Cone: CM-4 (Morse 4)
Main engine power: 2 HP
Speed from 68 to 1.270 rpm (head table)
Advances from 0,10 to 0,40 mm per turn (plate)
Table with T-slots and T-slots base
Flexible tube with nozzle next to the head
Typical applications
Drilling and sanding of medium parts in general machining, heating, utility and maintenance, with Morse 4 cone brushes and table adjustable in height to adjust the piece.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
drill column of the Erlo TCA series, with head of speed and advance selectors, tentate column to raise the table and cast base with T slots It is used for drilling, drilling and related operations in medium-sized workshop parts, with Morse 4. cone tools
Model points
The head plate identifies the TCA-40. model Incorporates vertical work rest blade depth, advance selector and manual advance with three-arm steering wheel, in addition to a table with spindle. speeds (Z9Z.)
Configuration of this unit
Brand and model: Erlo TCA-40 (head plate)
Type: column
Drilling capacity: 40 mm
spindle Cone: CM-4 (Morse 4)
Main engine power: 2 HP
Speed from 68 to 1.270 rpm (head table)
Advances from 0,10 to 0,40 mm per turn (plate)
Table with T-slots and T-slots base
Flexible tube with nozzle next to the head
Typical applications
Drilling and sanding of medium parts in general machining, heating, utility and maintenance, with Morse 4 cone brushes and table adjustable in height to adjust the piece.
See in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/taladro-columna-erlo-tca-41
