



Pillar drill Erlo TCA-40
Technical specification
| Category | Drilling |
| Make | ERLO |
| Condition | Used |
| Location | Spain |
Description
Erlo TCA-40 pillar drill
Pillar drill with a T-slotted table and a T-slotted base, for drilling workshop parts. The TCA-40 model and the Erlo name appear on the plate on the head.
The head groups the speed change levers, a push-button panel and a feed capstan with red handles, plus a side handwheel. The table has a perimeter tray with T-slots, and the base is a T-slotted plate for larger workpieces.
Configuration of this unit
Model: TCA-40 (head plate and data sheet).
Type: pillar (data sheet).
Drilling capacity: 40 (data sheet, no unit given).
Taper: CM-4 (data sheet).
Main motor power: 2 HP (data sheet).
T-slotted table with tray.
T-slotted base.
Adjustable flexible arm next to the spindle.
Motor mounted on the head.
Typical applications
Drilling in maintenance, toolmaking and general machining, with workpieces clamped to the table or, for larger parts, to the base.
See it at Ferrotall
The equipment is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Pillar drill with a T-slotted table and a T-slotted base, for drilling workshop parts. The TCA-40 model and the Erlo name appear on the plate on the head.
The head groups the speed change levers, a push-button panel and a feed capstan with red handles, plus a side handwheel. The table has a perimeter tray with T-slots, and the base is a T-slotted plate for larger workpieces.
Configuration of this unit
Model: TCA-40 (head plate and data sheet).
Type: pillar (data sheet).
Drilling capacity: 40 (data sheet, no unit given).
Taper: CM-4 (data sheet).
Main motor power: 2 HP (data sheet).
T-slotted table with tray.
T-slotted base.
Adjustable flexible arm next to the spindle.
Motor mounted on the head.
Typical applications
Drilling in maintenance, toolmaking and general machining, with workpieces clamped to the table or, for larger parts, to the base.
See it at Ferrotall
The equipment is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/pillar-drill-erlo-tca-40
