Mitsubishi MAF 280/210 8.26" Floor Type Horizontal Boring Mill
Technical specification
| Category | Borers |
| Model | MAF 280/210 NC |
| Year | 2010 |
| Condition | Used |
| Location | Melville, New York, United States |
| Model | MAF 280/210 NC |
| Age | 2010 ® |
| Ref# | 32218 |
| Feature | Siemens 840D Solution Line CNC Control (Retrofit 2010) |
| Feature | 2800 RPM Auxillary Spindle |
| Feature | Through Spindle Coolant |
| Feature | Long Reach Milling Attachment: #50 Taper, 1200 RPM |
| Feature | Universal Milling Head, Model UHM-40, 42" Reach |
| Feature | Facing Head, Surfacing Slide, Model SHM-2000 U-Axis |
| Feature | Full Length Chip Conveyor |
| Feature | New Spare Spindle & Bearings Available |
| Feature | 2-Ton Jib Crane For Loading Attachments |
| Feature | 100 HP / 120 HP Main Spindle Motor |
| Feature | Machine Was Built New in 1980's and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010. |
Description
SPECIFICATIONS:
Spindle Diameter
8.27"
Column Travel, X-Axis
492.12"
Headstock Vertical Travel, Y-Axis
236.22"
Main Spindle Horiz Travel, Z-Axis
51.18"
Ramstock, Travel, W-Axis
39.37"
Combined Travel Z & W Axis
90.45"
Auxillary Spindle, C-Axis
19.68"
Ramstock, Travel, W-Axis
39.37"
Combined Travel C & W Axis
59.05"
Main Spindle Speeds, Z-Axis
3-600 RPM
Auxillary Spindle Speeds, C-Axis
75-2800 RPM
High Speed Shaft For Attachments
7-2500 RPM
Front Plate Dimensions
31.69" x 42.32"
Rapid Traverse X,Y,Z Axes
196.85 IPM
Feed Rate
0.04-157.48 IPM
HEADSTOCK:
Main Spindle, Z-Axis:
Boring Spindle Diameter
8.26"
Milling Spindle Diameter
12.20"
Spindle Taper
#60 ANSI
Spindle Travel, Z-Axis
51.18"
Speeds
3-600 RPM
Spindle Motor
100 HP/ 120 HP
Auxillary Spindle, C-Axis:
Spindle Diameter
11.02"
Spindle Taper
#60 ANSI
Spindle Travel
19.68"
Spindle Speeds
75-2800 RPM
Maximum Thrust
6,600 Lbs
Spindle Motor
20 HP
Coolant Thru Spindle
Yes
DESCRIPTION OF AXES:
Column Travel
X-Axis
Spindle Vertical
Y-Axis
Main Spindle In & Out
Z-Axis
Auxilliary Spindle In & Out
C-Axis
Surfacing Slide
U-Axis
Headstock In & Out
W-Axis
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-40, 42" Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
100 HP / 120 HP Main Spindle Motor
Machine Was Built New in 1980's and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010.
Spindle Diameter
8.27"
Column Travel, X-Axis
492.12"
Headstock Vertical Travel, Y-Axis
236.22"
Main Spindle Horiz Travel, Z-Axis
51.18"
Ramstock, Travel, W-Axis
39.37"
Combined Travel Z & W Axis
90.45"
Auxillary Spindle, C-Axis
19.68"
Ramstock, Travel, W-Axis
39.37"
Combined Travel C & W Axis
59.05"
Main Spindle Speeds, Z-Axis
3-600 RPM
Auxillary Spindle Speeds, C-Axis
75-2800 RPM
High Speed Shaft For Attachments
7-2500 RPM
Front Plate Dimensions
31.69" x 42.32"
Rapid Traverse X,Y,Z Axes
196.85 IPM
Feed Rate
0.04-157.48 IPM
HEADSTOCK:
Main Spindle, Z-Axis:
Boring Spindle Diameter
8.26"
Milling Spindle Diameter
12.20"
Spindle Taper
#60 ANSI
Spindle Travel, Z-Axis
51.18"
Speeds
3-600 RPM
Spindle Motor
100 HP/ 120 HP
Auxillary Spindle, C-Axis:
Spindle Diameter
11.02"
Spindle Taper
#60 ANSI
Spindle Travel
19.68"
Spindle Speeds
75-2800 RPM
Maximum Thrust
6,600 Lbs
Spindle Motor
20 HP
Coolant Thru Spindle
Yes
DESCRIPTION OF AXES:
Column Travel
X-Axis
Spindle Vertical
Y-Axis
Main Spindle In & Out
Z-Axis
Auxilliary Spindle In & Out
C-Axis
Surfacing Slide
U-Axis
Headstock In & Out
W-Axis
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-40, 42" Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
100 HP / 120 HP Main Spindle Motor
Machine Was Built New in 1980's and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010.
Imported from the Prestige Equipment Corporation stock feed (https://www.prestigeequipment.com/r2d_inc/inc_searchresults.php). Source listing: https://www.prestigeequipment.com/Boring-Mills-Horizontal-Floor-Type-CNC/Mitsubishi-MAF-280210-NC/32218/i
