








Milling machine MRF FU-145
Technical specification
| Category | Milling machines |
| Make | MRF |
| Condition | Used |
| Location | Spain |
Description
MRF FU-145 milling machine
The MRF FU-145 is a conventional milling machine with a large 1,450 x 320 mm table and travels of 930 mm in X, 300 mm in Y and 500 mm in Z. It is used in general machining shops for medium-sized and long parts.
Key strengths
The long table allows several parts to be mounted for the same pass, or long workpieces to be machined. Speed and feed selection is by lever, simple to use with no electronics, and the start push-button panel is on the front.
Configuration of this unit
Model: FU-145
X, Y, Z travels: 930 / 300 / 500 mm
Table: 1,450 x 320 mm
Head speed: up to 1,500 rpm; the selector starts at 35 rpm
Swivelling head with graduated ring
Overall dimensions: 1,820 x 1,720 x 1,980 mm; weight: 3,090 kg
Typical applications
Face milling and slotting, squaring, and machining of machine beds, flanges, fixtures and spare parts.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The MRF FU-145 is a conventional milling machine with a large 1,450 x 320 mm table and travels of 930 mm in X, 300 mm in Y and 500 mm in Z. It is used in general machining shops for medium-sized and long parts.
Key strengths
The long table allows several parts to be mounted for the same pass, or long workpieces to be machined. Speed and feed selection is by lever, simple to use with no electronics, and the start push-button panel is on the front.
Configuration of this unit
Model: FU-145
X, Y, Z travels: 930 / 300 / 500 mm
Table: 1,450 x 320 mm
Head speed: up to 1,500 rpm; the selector starts at 35 rpm
Swivelling head with graduated ring
Overall dimensions: 1,820 x 1,720 x 1,980 mm; weight: 3,090 kg
Typical applications
Face milling and slotting, squaring, and machining of machine beds, flanges, fixtures and spare parts.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/milling-machine-mrf-fu-145
