





Milling machine MRF FU-145
Technical specification
| Category | Milling machines |
| Make | MRF |
| Condition | Used |
| Location | Spain |
Description
What is it?
milling machine universal MRF model FU-145, with head orientable, for milling and drilling of medium and large parts in machining workshop. It is available at Ferrotall.
Strengths
A universal milling machine allows to work with horizontal and vertical head and to guide it according to the piece. In this unit the head is orientable and has a range of spindle speeds and indicated plate advances.
Configuration of this unit
Brand and model: MRF FU-145 (logo MRF visible in the photos)
Type: universal
X, Y, Z: 1.140, 300 and 500 mm
Table: 1.450 x 320 mm
Cone: ISO 50, according to sheet
head: 35 to 1.500 rpm according to sheet; plate with ranges of 38 to 1.440 rpm
head orientable
15 to 645 mm / min
Pipitre with spindle controls, advance, cooling and running
Typical applications
Milling of medium and large parts in steel and cast, cutting and finishing, machining of chaflanes and inclinations with head orientable.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
milling machine universal MRF model FU-145, with head orientable, for milling and drilling of medium and large parts in machining workshop. It is available at Ferrotall.
Strengths
A universal milling machine allows to work with horizontal and vertical head and to guide it according to the piece. In this unit the head is orientable and has a range of spindle speeds and indicated plate advances.
Configuration of this unit
Brand and model: MRF FU-145 (logo MRF visible in the photos)
Type: universal
X, Y, Z: 1.140, 300 and 500 mm
Table: 1.450 x 320 mm
Cone: ISO 50, according to sheet
head: 35 to 1.500 rpm according to sheet; plate with ranges of 38 to 1.440 rpm
head orientable
15 to 645 mm / min
Pipitre with spindle controls, advance, cooling and running
Typical applications
Milling of medium and large parts in steel and cast, cutting and finishing, machining of chaflanes and inclinations with head orientable.
See her in Ferrotall
The machine is located in our facilities of Monforte del Cid (Alicante), where you can visit it; contact us to see it running or receive a video. Our own technical service is responsible for transport, installation and start-up.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/fresadora-mrf-fu-146
