




Milling machine Lagun FCM 2000
Technical specification
| Category | Milling machines |
| Make | LAGUN |
| Condition | Used |
| Location | Spain |
Description
What it is
The Lagun FCM 2000 is a conventional milling machine with a large 2,000 x 450 mm table and a swivelling head, for machining long or heavy parts such as machine beds, slideways, moulds and tooling. Lagun is a Spanish manufacturer of conventional milling machines.
Key strengths
Our unit has a Fagor digital readout showing three axes (X, Y, Z), which makes positioning easier without reading the dials.
Configuration of this unit
Model: Lagun FCM-2000 (marking)
X, Y, Z travels: 1,300 x 430 x 470 mm (our data sheet)
Table: 2,000 x 450 mm with T-slots
Fagor readout showing X, Y, Z
Console with ammeters, selector switches and emergency stop
Swivelling head
Typical applications
Milling machine beds, frames, plates and long parts, face milling large surfaces and machining tooling and moulds in machining and fabrication shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Lagun FCM 2000 is a conventional milling machine with a large 2,000 x 450 mm table and a swivelling head, for machining long or heavy parts such as machine beds, slideways, moulds and tooling. Lagun is a Spanish manufacturer of conventional milling machines.
Key strengths
Our unit has a Fagor digital readout showing three axes (X, Y, Z), which makes positioning easier without reading the dials.
Configuration of this unit
Model: Lagun FCM-2000 (marking)
X, Y, Z travels: 1,300 x 430 x 470 mm (our data sheet)
Table: 2,000 x 450 mm with T-slots
Fagor readout showing X, Y, Z
Console with ammeters, selector switches and emergency stop
Swivelling head
Typical applications
Milling machine beds, frames, plates and long parts, face milling large surfaces and machining tooling and moulds in machining and fabrication shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/milling-machine-lagun-fcm-2000
