










Milling machine Elliott 70 Series mod. 418
Technical specification
| Category | Milling machines |
| Make | ELLIOTT |
| Condition | Used |
| Location | Spain |
Description
Used Elliott 70 Series Mod. 418 milling machine
Elliott 70 Series knee-type milling machine, model 418 (marked on the machine), with a vertical head visible in the photos, a 1,930 x 410 mm table and a 15 hp main motor. It is a sturdy machine for milling medium to large parts in the workshop.
Why this model is of interest
Elliott is a milling machine manufacturer whose historical 70 Series documentation (manuals and catalogues) is available on the market. A machine from this series with 15 hp is well suited to rough milling with good-sized cutters.
Configuration of this unit
Model: 70 Series Mod. 418 (Elliott plate and logo in the photos)
X, Y, Z travels: 1,400 / 550 / 500 mm
Table: 1,930 x 410 mm
Main motor power: 15 hp
In the photos: vertical head on the column, T-slotted table, knee with power feeds and pendant control with emergency stop
Taper, speeds, year and weight: not recorded; to be confirmed
Typical applications
Milling flat faces, squares, slots and contours on large parts, roughing tooling, and repair and maintenance work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Elliott 70 Series knee-type milling machine, model 418 (marked on the machine), with a vertical head visible in the photos, a 1,930 x 410 mm table and a 15 hp main motor. It is a sturdy machine for milling medium to large parts in the workshop.
Why this model is of interest
Elliott is a milling machine manufacturer whose historical 70 Series documentation (manuals and catalogues) is available on the market. A machine from this series with 15 hp is well suited to rough milling with good-sized cutters.
Configuration of this unit
Model: 70 Series Mod. 418 (Elliott plate and logo in the photos)
X, Y, Z travels: 1,400 / 550 / 500 mm
Table: 1,930 x 410 mm
Main motor power: 15 hp
In the photos: vertical head on the column, T-slotted table, knee with power feeds and pendant control with emergency stop
Taper, speeds, year and weight: not recorded; to be confirmed
Typical applications
Milling flat faces, squares, slots and contours on large parts, roughing tooling, and repair and maintenance work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/milling-machine-elliott-70-series-mod-418
