



Milling machine Anayak FV-4
Technical specification
| Category | Milling machines |
| Make | ANAYAK |
| Condition | Used |
| Location | Spain |
Description
Used Anayak FV-4 turret milling machine
Conventional turret milling machine from the Spanish manufacturer Anayak, for machining workshop parts, tooling and maintenance work, with a vertical head and a long-travel table.
Key strengths of the model
According to the published information on the FV-4, it is a cast-iron turret milling machine with a swivelling head, suitable for vertical milling and, with accessories, horizontal milling. Since the sixties Anayak built turret machines based on the Bridgeport design.
Configuration of this unit
Model: FV-4, turret type
Travels: 800 mm (X), 400 mm (Y), 500 mm (Z)
Table: 1,340 x 305 mm
Taper: ISO 40 DIN 2080
Head speeds: 50 to 2,500 rpm
Overall dimensions: 1,800 x 2,000 x 2,080 mm
Two-axis Fagor digital readout, X and Y
Machine vice on the table
Typical applications
Face milling, squaring, slotting and precision drilling on one-off parts and short runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Conventional turret milling machine from the Spanish manufacturer Anayak, for machining workshop parts, tooling and maintenance work, with a vertical head and a long-travel table.
Key strengths of the model
According to the published information on the FV-4, it is a cast-iron turret milling machine with a swivelling head, suitable for vertical milling and, with accessories, horizontal milling. Since the sixties Anayak built turret machines based on the Bridgeport design.
Configuration of this unit
Model: FV-4, turret type
Travels: 800 mm (X), 400 mm (Y), 500 mm (Z)
Table: 1,340 x 305 mm
Taper: ISO 40 DIN 2080
Head speeds: 50 to 2,500 rpm
Overall dimensions: 1,800 x 2,000 x 2,080 mm
Two-axis Fagor digital readout, X and Y
Machine vice on the table
Typical applications
Face milling, squaring, slotting and precision drilling on one-off parts and short runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/milling-machine-anayak-fv-4
