



Machining centre Pinnacle VMC1000S
Technical specification
| Category | Machining centres |
| Make | PINNACLE |
| Condition | Used |
| Location | Spain |
Description
Pinnacle VMC-1000S vertical machining centre
The Pinnacle VMC-1000S is a vertical machining centre with 1,020 x 560 x 560 mm travels and a 1,200 x 510 mm table, suited to milling, drilling and tapping medium-sized and elongated parts in production and toolmaking.
Key strengths of the model and control
Pinnacle is a Taiwanese brand of machining centres. According to market listings for this model, it is offered with an 8,000 rpm spindle and Fanuc control. The Fanuc Series 0i-MC on this unit is a milling control with a large installed base and readily available training and spare parts.
Configuration of this unit
Model: Pinnacle VMC-1000S (marked on the machine)
Control: Fanuc Series 0i-MC (visible on the screen)
Table dimensions: 1,200 x 510 mm
X, Y, Z travels: 1,020 x 560 x 560 mm
Spindle speed: 8,000 rpm
Disc-type tool changer (visible)
Portable electronic handwheel (visible in photos)
Year: December 2005
Overall dimensions: 3,000 x 2,100 x 2,650 mm; weight: 5,800 kg
Typical applications
Medium-sized parts in steel, cast iron and aluminium; tooling, simple moulds, mechanical components and short and medium runs in machining and subcontract shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Pinnacle VMC-1000S is a vertical machining centre with 1,020 x 560 x 560 mm travels and a 1,200 x 510 mm table, suited to milling, drilling and tapping medium-sized and elongated parts in production and toolmaking.
Key strengths of the model and control
Pinnacle is a Taiwanese brand of machining centres. According to market listings for this model, it is offered with an 8,000 rpm spindle and Fanuc control. The Fanuc Series 0i-MC on this unit is a milling control with a large installed base and readily available training and spare parts.
Configuration of this unit
Model: Pinnacle VMC-1000S (marked on the machine)
Control: Fanuc Series 0i-MC (visible on the screen)
Table dimensions: 1,200 x 510 mm
X, Y, Z travels: 1,020 x 560 x 560 mm
Spindle speed: 8,000 rpm
Disc-type tool changer (visible)
Portable electronic handwheel (visible in photos)
Year: December 2005
Overall dimensions: 3,000 x 2,100 x 2,650 mm; weight: 5,800 kg
Typical applications
Medium-sized parts in steel, cast iron and aluminium; tooling, simple moulds, mechanical components and short and medium runs in machining and subcontract shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-pinnacle-vmc1000s
