




Machining centre Lagun GVC 1000
Technical specification
| Category | Machining centres |
| Make | LAGUN |
| Condition | Used |
| Location | Spain |
Description
Lagun GVC 1000 machining centre
The Lagun GVC 1000 is a vertical machining centre from the Lagun brand (Grupo Goratu), for medium-sized parts in general engineering, die making and subcontract work.
Key strengths
According to the manufacturer's catalogue, the model offers a BT40 spindle from 60 to 6,000 rpm, an 18-tool changer with bidirectional selection, a 750 kg table load capacity and 20,000 mm/min rapid traverse in X and Y.
Configuration of this unit
Year: 2002
Heidenhain 426 control
Table: 1,200 x 500 mm; X/Y/Z travels: 1,000 / 500 / 620 mm
BT 40 taper; spindle up to 6,000 rpm
18-position tool changer; swarf conveyor
Dimensions: 2,240 x 2,930 x 2,750 mm
Typical applications
Machining of steel, cast iron and aluminium parts, moulds and fixtures, and short- or medium-run production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Lagun GVC 1000 is a vertical machining centre from the Lagun brand (Grupo Goratu), for medium-sized parts in general engineering, die making and subcontract work.
Key strengths
According to the manufacturer's catalogue, the model offers a BT40 spindle from 60 to 6,000 rpm, an 18-tool changer with bidirectional selection, a 750 kg table load capacity and 20,000 mm/min rapid traverse in X and Y.
Configuration of this unit
Year: 2002
Heidenhain 426 control
Table: 1,200 x 500 mm; X/Y/Z travels: 1,000 / 500 / 620 mm
BT 40 taper; spindle up to 6,000 rpm
18-position tool changer; swarf conveyor
Dimensions: 2,240 x 2,930 x 2,750 mm
Typical applications
Machining of steel, cast iron and aluminium parts, moulds and fixtures, and short- or medium-run production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-lagun-gvc-1000-ref-043514
