


Machining centre Lagun CNG 5M
Technical specification
| Category | Machining centres |
| Make | LAGUN |
| Condition | Used |
| Location | Spain |
Description
Lagun GNC 5M milling centre
The Lagun GNC 5M is a three-axis CNC milling machine with 1,000 x 450 x 540 mm travels and a 1,525 x 325 mm table. It is a compact milling machine for long, narrow parts, tooling and medium-sized machining work.
Control and series features
According to a listing for another Lagun GNC 5 unit, the series has an ISO 40 taper, speeds up to 4,000 rpm and a rapid traverse of 6 m/min; these are series data, not verified here. On this unit, the start-up screen on the console shows a Fagor 8055/A-M.
Configuration of this unit
Control: Fagor 8055/A-M (start-up screen in photo)
Table: 1,525 x 325 mm
X, Y, Z travels: 1,000 x 450 x 540 mm
Spindle taper: ISO 40
No tool changer
Swarf conveyor: yes
No through-tool coolant
Year: 2001
Overall dimensions: 2,670 x 3,275 x 2,117 mm; weight: 4,450 kg
Typical applications
Milling, drilling and boring of general engineering parts, tooling and plates, with manual tool change, in subcontract and maintenance shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Lagun GNC 5M is a three-axis CNC milling machine with 1,000 x 450 x 540 mm travels and a 1,525 x 325 mm table. It is a compact milling machine for long, narrow parts, tooling and medium-sized machining work.
Control and series features
According to a listing for another Lagun GNC 5 unit, the series has an ISO 40 taper, speeds up to 4,000 rpm and a rapid traverse of 6 m/min; these are series data, not verified here. On this unit, the start-up screen on the console shows a Fagor 8055/A-M.
Configuration of this unit
Control: Fagor 8055/A-M (start-up screen in photo)
Table: 1,525 x 325 mm
X, Y, Z travels: 1,000 x 450 x 540 mm
Spindle taper: ISO 40
No tool changer
Swarf conveyor: yes
No through-tool coolant
Year: 2001
Overall dimensions: 2,670 x 3,275 x 2,117 mm; weight: 4,450 kg
Typical applications
Milling, drilling and boring of general engineering parts, tooling and plates, with manual tool change, in subcontract and maintenance shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-lagun-gnc-5m
