







Machining centre Kondia HM1060
Technical specification
| Category | Machining centres |
| Make | ferrotall-nuevo |
| Condition | Used |
| Location | Spain |
Description
What it is
Kondia HM1060 vertical machining centre, built in 2001. Kondia is a Spanish machine tool manufacturer, and its travels make this machine suitable for machining medium-sized parts in steel, cast iron and aluminium.
Strengths
The 1,000 x 600 x 510 mm travels over a 1,120 x 600 mm table allow long parts or several parts per set-up. According to our data sheet, the control is a Heidenhain and the machine has through-tool coolant, which is useful for deep drilling.
Configuration of this unit
Model: Kondia HM1060; year 2001
Control: Heidenhain
Table: 1,120 x 600 mm; X/Y/Z travels: 1,000 / 600 / 510 mm
BT-40 taper; through-tool coolant
Random-type tool changer (according to data sheet), with tool disc
Swarf conveyor
Overall dimensions: 2,270 x 2,240 x 2,825 mm; weight 5,600 kg
Typical applications
Milling of tooling parts, frames and medium-sized mechanical components, for subcontract work and in-house production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Kondia HM1060 vertical machining centre, built in 2001. Kondia is a Spanish machine tool manufacturer, and its travels make this machine suitable for machining medium-sized parts in steel, cast iron and aluminium.
Strengths
The 1,000 x 600 x 510 mm travels over a 1,120 x 600 mm table allow long parts or several parts per set-up. According to our data sheet, the control is a Heidenhain and the machine has through-tool coolant, which is useful for deep drilling.
Configuration of this unit
Model: Kondia HM1060; year 2001
Control: Heidenhain
Table: 1,120 x 600 mm; X/Y/Z travels: 1,000 / 600 / 510 mm
BT-40 taper; through-tool coolant
Random-type tool changer (according to data sheet), with tool disc
Swarf conveyor
Overall dimensions: 2,270 x 2,240 x 2,825 mm; weight 5,600 kg
Typical applications
Milling of tooling parts, frames and medium-sized mechanical components, for subcontract work and in-house production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-kondia-hm1060
