





Machining centre Kondia B-1000
Technical specification
| Category | Machining centres |
| Make | KONDIA |
| Condition | Used |
| Location | Spain |
Description
Kondia B-1000 bed-type CNC milling machine
The Kondia B-1000 is a bed-type CNC milling machine from the Basque manufacturer Kondia, designed for machining medium-sized parts in general engineering, toolmaking and repair shops. The photos of this unit show a column and vertical head machine, with a T-slotted table and a GE Fanuc control.
Key strengths
According to adverts for other units of the model, the B-1000 offers travels of around 1,000 x 400 x 510 mm, an ISO 40 taper and a spindle of up to 6,000 rpm. The GE Fanuc Series 0-M is a very widespread control, with plenty of support and maintenance available on the market.
Configuration of this unit
Model: Kondia B-1000 (lettering on the head)
Control: GE Fanuc Series 0-M (visible on the panel screen)
Table with three T-slots
Separate hydraulic unit (visible in the photos)
Position readout on the side of the machine
Electronic handwheel on the pendant
Typical applications
Milling of medium-sized parts, fixtures, plates and machinery components; workshop jobs that call for moderate travels and conventional CNC programming.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
The Kondia B-1000 is a bed-type CNC milling machine from the Basque manufacturer Kondia, designed for machining medium-sized parts in general engineering, toolmaking and repair shops. The photos of this unit show a column and vertical head machine, with a T-slotted table and a GE Fanuc control.
Key strengths
According to adverts for other units of the model, the B-1000 offers travels of around 1,000 x 400 x 510 mm, an ISO 40 taper and a spindle of up to 6,000 rpm. The GE Fanuc Series 0-M is a very widespread control, with plenty of support and maintenance available on the market.
Configuration of this unit
Model: Kondia B-1000 (lettering on the head)
Control: GE Fanuc Series 0-M (visible on the panel screen)
Table with three T-slots
Separate hydraulic unit (visible in the photos)
Position readout on the side of the machine
Electronic handwheel on the pendant
Typical applications
Milling of medium-sized parts, fixtures, plates and machinery components; workshop jobs that call for moderate travels and conventional CNC programming.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Listing text machine-translated into English from Spanish. Make and model are as supplied by the dealer.
Imported from the Ferrotall Maquinas Herramienta S.L. stock feed (https://www.ferrotall.com/products.json). Source listing: https://www.ferrotall.com/en/products/machining-centre-kondia-b-1000-ref-034550
